Source: bladerf
Priority: optional
Maintainer: A. Maitland Bottoms <bottoms@debian.org>
Build-Depends: cmake (>= 2.8.5),
               debhelper (>=9),
               doxygen,
               help2man,
               libncurses5-dev,
               libtecla-dev | libtecla1-dev,
               libusb-1.0-0-dev (>= 1.0.12) [linux-any],
               libusb-dev [hurd-i386],
               libusb2-dev [kfreebsd-any],
               pandoc,
               pkg-config
Standards-Version: 4.1.4
Section: comm
Homepage: http://www.nuand.com/bladeRF
Vcs-Browser: https://salsa.debian.org/bottoms/pkg-bladerf
Vcs-Git: https://salsa.debian.org/bottoms/pkg-bladerf.git

Package: libbladerf1
Section: libs
Architecture: any
Multi-Arch: same
Pre-Depends: ${misc:Pre-Depends}
Depends: ${misc:Depends}, ${shlibs:Depends}
Suggests: bladerf, bladerf-firmware, bladerf-fpga
Description: nuand bladeRF software-defined radio device
 The nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package provides the host library.

Package: libbladerf-dev
Section: libdevel
Architecture: any
Multi-Arch: same
Depends: libbladerf1 (= ${binary:Version}),
         libc6-dev | libc-dev,
         ${misc:Depends}
Description: nuand bladeRF software-defined radio device (header files)
 The nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package contains the header files required for compiling bladeRF
 applications.

Package: bladerf
Architecture: any
Multi-Arch: foreign
Depends: libbladerf1 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends}
Provides: bladerf-host
Conflicts: bladerf-host
Replaces: bladerf-host
Description: nuand bladeRF software-defined radio device (tools)
 The nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package provides command-line tools for controlling the bladeRF.

Package: bladerf-fpga-hostedx40
Section: contrib/comm
Architecture: any
Depends: ca-certificates, libbladerf1, wget, ${misc:Depends}, ${shlibs:Depends}
Recommends: bladerf
Suggests: bladerf-firmware
Provides: bladerf-fpga
Description: nuand bladeRF FPGA bitstream downloader (hostedx40)
 This empty package will, at the time of installation, download an appropriate
 FPGA bitstream for using the nuand bladeRF in a hosted (USB-controlled)
 configuration.  The FPGA bitstream will be downloaded from
 http://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream is for the bladeRF x40 with the Altera Cyclone IV
 EP4CE40 FPGA.
 .
 Note that this will not upgrade the bladeRF itself.  That can be done
 with the bladeRF-cli utility.

Package: bladerf-fpga-hostedx115
Section: contrib/comm
Architecture: any
Depends: ca-certificates, libbladerf1, wget, ${misc:Depends}, ${shlibs:Depends}
Recommends: bladerf
Suggests: bladerf-firmware
Provides: bladerf-fpga
Description: nuand bladeRF FPGA bitstream downloader (hostedx115)
 This empty package will, at the time of installation, download an appropriate
 FPGA bitstream for using the nuand bladeRF in a hosted (USB-controlled)
 configuration.  The FPGA bitstream will be downloaded from
 http://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream is for the bladeRF x115 with the Altera Cyclone IV
 EP4CE115 FPGA.
 .
 Note that this will not upgrade the bladeRF itself.  That can be done
 with the bladeRF-cli utility.

Package: bladerf-firmware-fx3
Section: contrib/comm
Architecture: any
Depends: ca-certificates, libbladerf1, wget, ${misc:Depends}, ${shlibs:Depends}
Recommends: bladerf
Suggests: bladerf-fpga
Provides: bladerf-firmware
Description: nuand bladeRF firmware downloader (FX3)
 This empty package will, at the time of installation, download an appropriate
 firmware image for using the nuand bladeRF with a Cypress FX3 USB
 controller.  The image will be downloaded from http://nuand.com/fx3/
 and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream will work for either the nuand bladeRF x40 or the x115.
 .
 Note that this will not upgrade the bladeRF itself.  That can be done
 with the bladeRF-cli utility.