Source: bladerf Priority: optional Maintainer: A. Maitland Bottoms Build-Depends: cmake, debhelper-compat (= 13), dh-python, doxygen, graphviz, help2man, libad9361-dev, libedit-dev, libncurses-dev, libtecla-dev | libtecla1-dev, libusb-1.0-0-dev [!kfreebsd-any], libusb2-dev [kfreebsd-any], pkg-config, python3-dev, python3-setuptools Standards-Version: 4.6.2 Rules-Requires-Root: no Section: comm Homepage: https://www.Nuand.com/bladeRF Vcs-Browser: https://salsa.debian.org/debian-hamradio-team/bladerf Vcs-Git: https://salsa.debian.org/debian-hamradio-team/bladerf.git Package: libbladerf2 Section: libs Architecture: any Multi-Arch: same Pre-Depends: ${misc:Pre-Depends} Depends: ${misc:Depends}, ${shlibs:Depends} Recommends: bladerf Suggests: bladerf-firmware, bladerf-fpga Description: Nuand bladeRF software-defined radio device The Nuand bladeRF is an open-source software-defined radio (SDR) system, comprised of an RF transceiver, a field-programmable gate array (FPGA), a microcontroller driving a USB 3.0 interface, and a suite of host libraries and drivers to facilitate interaction with the device. . This package provides the host library. Package: libbladerf-dev Section: libdevel Architecture: any Multi-Arch: same Depends: libbladerf2 (= ${binary:Version}), libc6-dev | libc-dev, ${misc:Depends} Suggests: libbladerf-doc Description: Nuand bladeRF software-defined radio device (header files) The Nuand bladeRF is an open-source software-defined radio (SDR) system, comprised of an RF transceiver, a field-programmable gate array (FPGA), a microcontroller driving a USB 3.0 interface, and a suite of host libraries and drivers to facilitate interaction with the device. . This package contains the header files required for compiling bladeRF applications. Package: libbladerf-doc Section: doc Architecture: all Multi-Arch: foreign Depends: libjs-mathjax, ${misc:Depends} Breaks: libbladerf-dev (<< 0.2019.07) Replaces: libbladerf-dev (<< 0.2019.07) Description: Nuand bladeRF software-defined radio device (API documentation) The Nuand bladeRF is an open-source software-defined radio (SDR) system, comprised of an RF transceiver, a field-programmable gate array (FPGA), a microcontroller driving a USB 3.0 interface, and a suite of host libraries and drivers to facilitate interaction with the device. . This package contains libbladeRF API documentation. Package: bladerf Architecture: any Multi-Arch: foreign Depends: libbladerf2 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends} Provides: bladerf-host Conflicts: bladerf-host Replaces: bladerf-host Description: Nuand bladeRF software-defined radio device (tools) The Nuand bladeRF is an open-source software-defined radio (SDR) system, comprised of an RF transceiver, a field-programmable gate array (FPGA), a microcontroller driving a USB 3.0 interface, and a suite of host libraries and drivers to facilitate interaction with the device. . This package provides command-line tools for controlling the bladeRF. Package: python3-bladerf Section: python Architecture: any Multi-Arch: foreign Depends: libbladerf-dev (= ${binary:Version}), python3-cffi, ${misc:Depends}, ${python3:Depends} Description: Nuand bladeRF software-defined radio device (Python) The Nuand bladeRF is an open-source software-defined radio (SDR) system, comprised of an RF transceiver, a field-programmable gate array (FPGA), a microcontroller driving a USB 3.0 interface, and a suite of host libraries and drivers to facilitate interaction with the device. . This package provides Python bindings for controlling the bladeRF. Package: bladerf-fpga-hostedx40 Section: contrib/comm Architecture: all Depends: ca-certificates, libbladerf2, wget, ${misc:Depends} Recommends: bladerf Suggests: bladerf-firmware Provides: bladerf-fpga Description: Nuand bladeRF FPGA bitstream downloader (hostedx40) This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF x40 with the Altera Cyclone IV EP4CE40 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility. Package: bladerf-fpga-hostedx115 Section: contrib/comm Architecture: all Depends: ca-certificates, libbladerf2, wget, ${misc:Depends} Recommends: bladerf Suggests: bladerf-firmware Provides: bladerf-fpga Description: Nuand bladeRF FPGA bitstream downloader (hostedx115) This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF x115 with the Altera Cyclone IV EP4CE115 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility. Package: bladerf-fpga-hostedxa4 Section: contrib/comm Architecture: all Depends: wget, ${misc:Depends} Recommends: bladerf Suggests: bladerf-firmware Provides: bladerf-fpga Description: Nuand bladeRF FPGA bitstream downloader (hostedxA4) This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF 2.0 Micro xA4 with the Altera Cyclone V 5CEBA4 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility. Package: bladerf-fpga-hostedxa5 Section: contrib/comm Architecture: all Depends: wget, ${misc:Depends} Recommends: bladerf Suggests: bladerf-firmware Provides: bladerf-fpga Description: Nuand bladeRF FPGA bitstream downloader (hostedxA5) This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF 2.0 Micro xA5 with the Altera Cyclone V 77KLE FPGA . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility. Package: bladerf-fpga-hostedxa9 Section: contrib/comm Architecture: all Depends: wget, ${misc:Depends} Recommends: bladerf Suggests: bladerf-firmware Provides: bladerf-fpga Description: Nuand bladeRF FPGA bitstream downloader (hostedxA9) This empty package will, at the time of installation, download an appropriate FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled) configuration. The FPGA bitstream will be downloaded from https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF. . This bitstream is for the bladeRF 2.0 Micro xA9 with the Altera Cyclone V 5CEBA9 FPGA. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility. Package: bladerf-firmware-fx3 Section: contrib/comm Architecture: all Depends: ca-certificates, libbladerf2, wget, ${misc:Depends} Recommends: bladerf Suggests: bladerf-fpga Provides: bladerf-firmware Description: Nuand bladeRF firmware downloader (FX3) This empty package will, at the time of installation, download an appropriate firmware image for using the Nuand bladeRF with a Cypress FX3 USB controller. The image will be downloaded from http://Nuand.com/fx3/ and saved to /usr/share/Nuand/bladeRF. . This bitstream will work for either the Nuand bladeRF x40 or the x115. . Note that this will not upgrade the bladeRF itself. That can be done with the bladeRF-cli utility.