linuxcnc (2.9.3-1) unstable; urgency=medium * New upstream version 2.9.3 * Added d/gbp.conf documenting current branch layout. * Avoid man page file conflict between linuxcnc-uspace and linuxcnc-uspace-dev (Closes: #1055493). * Build depend on current libgl-dev with obsolete libgl1-mesa-dev as alternative. * Change linuxcnc-doc-es package description from Spanish to English (Closes: #1057312). * Bring d/README.source and d/rules.in in line with upstream 2.9 branch. * Make sure to remove docs/man/index.db in clean target for rebuildability (Closes: #1045366). * Moved udev rules to /usr/ for usr merge (Closes: #1073692). * Use $(RM) macro where applicable. * Added Andy, Steffen and myself as uploaders. * Adjusted the vcs links in d/control to the actually git repo used. * Added homepage URL to appstream metadata. * Updated Standards-Version from 4.6.1 to 4.7.0. -- Petter Reinholdtsen Sun, 07 Jul 2024 14:09:33 +0200 linuxcnc (2.9.1-2) unstable; urgency=medium * Addressed build failure. -- Steffen Moeller Sun, 05 Nov 2023 12:59:16 +0100 linuxcnc (2.9.1-1) unstable; urgency=medium * New upstream version 2.9.1 * Add 7I94T, 7I97T, 7I76EU card support * docs: Add manpage for emccalib * Merge pull request #2684 from petterreinholdtsen/2.9-whatis-limit_axis * Merge pull request #2611 from phillc54/phillc54/docs * gmoccapy - deleted unused code * halcompile: Accept hal pins of type "port" * G71 - G72 tests * G71 and G72 cycle fix. Addresses #707 and #1146 * Merge pull request #2675 from LinuxCNC/c-morley-patch-1 * Update hal_glib.py * docs: minor changes to suit sim configs -- Andy Pugh Sun, 08 Oct 2023 15:16:06 +0100 linuxcnc (2.9.0) unstable; urgency=medium * Add firmware 7i96d_1pwm for 7i96 for PNCconf * add GTK and Qt backends to the OpenGL wayland workaround * Add new Mesa card support from Master to 2.9 * Add OutM simple output module support * Add preliminary 7I96S support * add sample hm2 stepper & servo configs for a couple of eth boards * add tests for mb2hal * Added user space HAL component for publishing HAL values to a MQTT broker. * Adding Limit_Axis Component * adding new Icons for manual and Linuxcnc * Axis Limits check: Revert bad fix, add "re-check" * axis.py: Address jog issue with missing axes. #2445 * FixBug #2169: Issue with arcs immediately after homing * carousel.comp: Add direct position control for stepgen and encoder modes * clean up handling of canterp * docs - Hundreds of updates * docs29: small changes while translating * encoder.c: Fix bug 2535 - missing tooth unreliable at low speed * enum: Add a HAL component to handle enumerated types * Fix "userspace" vs "realtime" nomenclature * fix a race in communication between Task and Motion * Fix for https://github.com/LinuxCNC/linuxcnc/issues/2410 * Fix for issue 2516: make sure the entire list is scanned when searching * Fix for issue 2530 G95, G96 and G97 with a $ to choose spindle * Fix gremlin commandline program to run again * fix halcompile test to work both rip and installed * Fix wonky filechooser behavior at first program load * gladevcp: - Many Updates * glcannon - Many Updates * gmoccapy - Many, Many Updates * hal_glib - Several Updates * hal_gpio: Generic GPIO driver for any platform supporting libgpiod * halcompile: Add command line arguments to provide compile and link flags * halscope: Several updats * hm2_eth: add support for 7i96 * hm2_pktuart: Support changes in Rx and Tx modules * homing: Fix for #2169 introduced #2308. * homing.c: Apply suggested fix for #2629 and #2388 Fix suggested by yuyue2013 * homing.c: More conventional syntax for bitmasking * hostmot2 bspi: sanity-check that channel echo enable matches receive buffer present * interpmodule: add interpreter.active_spindle property * interpmodule: fix `speed` property * Issue #1232: Fixed * Issue #1747: Fixed * Issue #2169: Fixed * Issue #2483. Partially ficed * limit_axis: - New component * Manually apply PR #2133 to 2.9 Original Author: luz paz * mb2hal Several Updates * Merge pull request #1976 from phillc54/phillc54/outm_for_2.8_pncconf * Merge pull request #1991 from smoe/docs_plasma * Merge pull request #2051 from hansu/docs-links * Merge pull request #2057 from hansu/gmoccapy-fix-missing-startup-code * Merge pull request #2069 from zz912/patch-11 * Merge pull request #2120 from hansu/issue-2111 * Merge pull request #2139 from smoe/docs_misc_mac_2 * Merge pull request #2141 from petterreinholdtsen/doc-https-shorter * Merge pull request #2144 from smoe/docs_misc_mac_3 * Merge pull request #2147 from petterreinholdtsen/debian-unstable-testing-supported * Merge pull request #2148 from smoe/docs_misc_mac_4 * Merge pull request #2153 from adamlouis/2.8-fix-get-program * Merge pull request #2155 from smoe/docs29_mac_1 * Merge pull request #2159 from smoe/docs29_mac_6_was_equiv_against_master * Merge pull request #2160 from smoe/docs29_mac_2 * Merge pull request #2161 from smoe/docs29_mac_5_equiv_to_PR_against_master * Merge pull request #2163 from petterreinholdtsen/2.9-man-adoc-authors * Merge pull request #2164 from petterreinholdtsen/2.9-rtapi-ioperm * Merge pull request #2165 from petterreinholdtsen/2.9-man-rtapi-io * Merge pull request #2167 from hansu/fix-mb2hal-pin-names * Merge pull request #2172 from petterreinholdtsen/i2gc-url * Merge pull request #2181 from smoe/2.8 * Merge pull request #2183 from smoe/docs_29_mac_11 * Merge pull request #2187 from smoe/docs_man_reformatting_xhc * Merge pull request #2190 from smoe/docs_misc_10 * Merge pull request #2192 from AlexmagToast/2.9 * Merge pull request #2194 from hansu/gmoccapy-3-4-1 * Merge pull request #2195 from smoe/netcat_build_deps * Merge pull request #2196 from LinuxCNC/find-zombies * Merge pull request #2207 from smoe/docs29_misc_pc_1 * Merge pull request #2208 from smoe/docs29_misc_pc_2 * Merge pull request #2216 from smoe/docs29_misc_pc_3 * Merge pull request #2220 from smoe/docs29_misc_lenovo_1 * Merge pull request #2223 from smoe/debian_build-indep * Merge pull request #2224 from smoe/docs29_misc_lenovo_2 * Merge pull request #2232 from hansu/docs-halshow * Merge pull request #2233 from LinuxCNC/linuxcnc-module-docs * Merge pull request #2234 from LinuxCNC/log-jjogmode * Merge pull request #2235 from smoe/docs29_mac_14 * Merge pull request #2238 from smoe/docs29_mac_12 * Merge pull request #2239 from LinuxCNC/prettier-errors * Merge pull request #2241 from smoe/docs29_mac_11 * Merge pull request #2242 from LinuxCNC/stricter-pluggable-interp * Merge pull request #2244 from LinuxCNC/canterp * Merge pull request #2246 from LinuxCNC/python2-to-3-in-sim-configs * Merge pull request #2248 from LinuxCNC/interpmodule-speed-type-2.8 * Merge pull request #2249 from LinuxCNC/fix-xyzab-tdr-packaging * Merge pull request #2253 from petterreinholdtsen/comp-mqtt-client * Merge pull request #2255 from LinuxCNC/merge-2.8-into-2.9 * Merge pull request #2256 from LinuxCNC/andypugh/halcompile_opts * Merge pull request #2265 from smoe/gmoccapy_suggests_installing_onboard * Merge pull request #2270 from sensille/mb2hal_fix_2.9 * Merge pull request #2272 from hansu/document-r-option * Merge pull request #2274 from hansu/add-mb2hal-tests * Merge pull request #2278 from sensille/mb2hal_v1 * Merge pull request #2280 from petterreinholdtsen/2.9-man-motion-spindle * Merge pull request #2283 from hansu/merge-2.8-into-2.9 * Merge pull request #2284 from smoe/docs29_misc_15 * Merge pull request #2288 from LinuxCNC/hm2-bspi-fixes * Merge pull request #2289 from LinuxCNC/2.8 * Merge pull request #2290 from hansu/add-mb2hal-v1.1-test * Merge pull request #2291 from hansu/merge-2.8-into-2.9 * Merge pull request #2293 from hansu/docs-move-halmodule * Merge pull request #2295 from hansu/docs-qtvcp-man-page * Merge pull request #2296 from LinuxCNC/halcompile-permissions * Merge pull request #2298 from sensille/mb2hal_v4 * Merge pull request #2302 from jepler/channel-valid * Merge pull request #2309 from petterreinholdtsen/2.9-adoc-indent-warnings * Merge pull request #2311 from cradek/2.9 * Merge pull request #2313 from jepler/no-glut * Merge pull request #2314 from LinuxCNC/pyopengl-glx * Merge pull request #2315 from LinuxCNC/fix-halcompile-tests * Merge pull request #2320 from Sigma1912/patch-1 * Merge pull request #2322 from smoe/docs_hal_revisited * Merge pull request #2323 from LinuxCNC/gmoccapy_logging * Merge pull request #2324 from smoe/docs_hal_basics * Merge pull request #2328 from LinuxCNC/jepler-fix-glBitmap * Merge pull request #2330 from LinuxCNC/gmoccapy-3-4-2 * Merge pull request #2333 from hansu/iconview-logging * Merge pull request #2334 from smoe/patch-12 * Merge pull request #2336 from hansu/gmoccapy-notification-attribute-errors * Merge pull request #2345 from smoe/docs29_ini_config * Merge pull request #2346 from LinuxCNC/fix-glBitmap-again * Merge pull request #2350 from phillc54/phillc54/gmoccapy * Merge pull request #2356 from phillc54/phillc54/gscreen * Merge pull request #2357 from smoe/docs29_misc_16 * Merge pull request #2360 from LinuxCNC/refresh-hm2-configs * Merge pull request #2362 from zz912/patch-13 * Merge pull request #2366 from satiowadahc/patch-6 * Merge pull request #2369 from LinuxCNC/dgarr/2.9vismach_fix * Merge pull request #2370 from LinuxCNC/hm2-rpspi-error-handling * Merge pull request #2373 from phillc54/phillc54/gladevcp * Merge pull request #2381 from phillc54/phillc54/gladevcp * Merge pull request #2383 from hansu/gmoccapy-3-4-2-1 * Merge pull request #2389 from LinuxCNC/little-doc-fixes * Merge pull request #2391 from LinuxCNC/hal_parport-is-realtime * Merge pull request #2396 from phillc54/phillc54/glade * Merge pull request #2397 from hansu/docs-gcode-properties * Merge pull request #2403 from hansu/docs-linunxcnc-stat-feedrate * Merge pull request #2406 from phillc54/phillc54/gladevcp * Merge pull request #2409 from smoe/docs29_misc_17 * Merge pull request #2421 from hansu/halscope-channel-selection * Merge pull request #2422 from LinuxCNC/libeditreadline * Merge pull request #2425 from LinuxCNC/fix-elbpcom * Merge pull request #2427 from havardAasen/haava/halscope-select-channel-dialog * Merge pull request #2428 from hansu/gladevcp-icons * Merge pull request #2430 from smoe/docs29_lenovo_100 * Merge pull request #2434 from hansu/gladevcp-window1 * Merge pull request #2438 from satiowadahc/cw-m5default * Merge pull request #2439 from LinuxCNC/fix-lintian * Merge pull request #2441 from hansu/gladevcp-icons-2 * Merge pull request #2449 from mrbubble62/mqtt-publisher * Merge pull request #2451 from zz912/patch-16 * Merge pull request #2452 from LinuxCNC/2.8-github-ci * Merge pull request #2456 from LinuxCNC/fix-mb2hal-tests-on-rtai * Merge pull request #2457 from hansu/docs-add-writing-tests * Merge pull request #2458 from LinuxCNC/fix-mb2hal-shutdown-segfaults * Merge pull request #2459 from LinuxCNC/fix-more-mb2hal-test-variability * Merge pull request #2461 from hansu/gmoccapy-3-4-3 * Merge pull request #2472 from snowgoer540/gregc/debqtvcp * Merge pull request #2475 from LinuxCNC/little-doc-fixes * Merge pull request #2477 from LinuxCNC/halscope-fix-vert-scale * Merge pull request #2479 from LinuxCNC/fix-2386-task-motion-race * Merge pull request #2493 from LinuxCNC/oneshot-fix * Merge pull request #2494 from LinuxCNC/python3-gcode-generators * Merge pull request #2517 from LinuxCNC/mux_generic-headers * Merge pull request #2518 from LinuxCNC/fix-rtapi_shmem_new-issue-2516 * Merge pull request #2519 from LinuxCNC/fix-single-step-test * Merge pull request #2521 from LinuxCNC/backport-clang-fixes-from-master * Merge pull request #2522 from rodw-au/2.9 * Merge pull request #2525 from snowgoer540/gregc/floating-point * Merge pull request #2526 from petterreinholdtsen/2.8-motion-man-pin-names * Merge pull request #2529 from dpslwk/patch-1 * Merge pull request #2533 from petterreinholdtsen/axis-lube-2.9 * Merge pull request #2534 from petterreinholdtsen/docs-man-bugs * Merge pull request #2537 from smoe/docs29_mac_102 * Merge pull request #2541 from petterreinholdtsen/docs-g30-typo * Merge pull request #2548 from luzpaz/config-typos-2.9 * Merge pull request #2550 from luzpaz/typos-docs * Merge pull request #2555 from smoe/docs29_mac_101 * Merge pull request #2556 from luzpaz/typos-lib * Merge pull request #2557 from petterreinholdtsen/2.9-man-mux-crossref * Merge pull request #2558 from LinuxCNC/suggest-libeditreadline * Merge pull request #2560 from luzpaz/typos-src-2.9 * Merge pull request #2563 from luzpaz/docs-typos * Merge pull request #2574 from petterreinholdtsen/2.9-iocontrol-pindesc-sync * Merge pull request #2578 from smoe/docs29_mac_103 * Merge pull request #2582 from luzpaz/typos-various-2.9 * Merge pull request #2592 from smoe/docs29_mac_104 * Merge pull request #2594 from petterreinholdtsen/2.9-sid-gcc-13 * Merge pull request #2595 from rodw-au/rodw-au-getting-linuxcnc-update * Merge pull request #2597 from phillc54/phillc54/halcomp * Merge pull request #2603 from The-going/parallel-building-2.9 * Merge pull request #2606 from smoe/configure.ac_source_beautification * Merge pull request #2638 from itaib/rigid_tap_fix * Merge pull request #2659 from LinuxCNC/spindle_ini_fix * Merge pull request #2660 from phillc54/phillc54/pncconf * Merge pull request #2673 from petterreinholdtsen/2.9-test-g71-issues-707 * Mesa abs encoders: Fix config parsing error Found whilst checking for bug. * mesa_modbus: New Driver * mesa_pktgyro_test.comp Allow use of uarts > 0 * mesa-7i65: fix a bug with stale data in fifo * message: Update HAL component docs to match behavior * Motion Type: Set the motion-type of rigid tap to 2 to match other spindle-sync cycles * ohmic.comp - fix bugs * pncconf - Many updates * qt_istat.py: Fix typos * qt5_graphics - Several Updates * qtaxis - Several Updates * qtdagon - 100+ Updates * qtplasmac - 100+ Updates * qttouchy -fix sample config loading error, remove MPG selection buttons * qtvcp - 200+ updates * qtvcp --mdi_line: fix multi axes movement Addresses Closes: #1053251 * Revert "update pot files" * RS274: M5 default to all spindles. * sai: Fix https://github.com/LinuxCNC/linuxcnc/issues/1279 * sims: fix startup issues in axis sims * sims: fix startup issues in qtvcp sims * sims: update and tidy qtplasmac sims * spindle INI -fix non working M4 in some situations * tooldata Added a tool database interface * wj200: only complain once about "failed to get status" * wj200: whitespace cleanup, no behavior change * xhc-hb04.tcl accept upper or lowercase keywords * xyzab_tdr sim config fix wrong sign in fwd kins -- andypugh Wed, 4 Oct 2023 12:07:00 +0100 linuxcnc (2.9.0~pre1+git20230208.f1270d6ed7-1) unstable; urgency=medium * New upstream version 2.9.0~pre1+git20230208.f1270d6ed7 (Closes: #1023651). * Fix motion error for some full-circle spirals. * Fix issue with arc moves immediately after homing. * Fix realtime thread priorities. * Lots of updates to GUIs. * Lots of improvements to docs and translations. * Hostmot2: Add OutM support. * Hostmot2: Add support for 7i96S. * Hostmot2: Fix config string "num_oneshots" parsing bug. * Hostmot2: BSPI and 7i65 fixes. * halscope: Fix crash bug. * PNCconf: Add support for 7i96S, InM, and OutM. * PNCconf: Misc fixes. * halcompile: Add command-line args to set compiler & linker flags. * halcompile: Fix permissions of installed components. * OpenGL: Don't use GLUT. * OpenGL: Always use GLX, not EGL, even on Wayland. * OpenGL: Work around a new bug in glBitmap(). * glcanon: Fix mm units. * Warn on multiple tools in a single toolchanger pocket. * Add div2 component. * Add mqtt-publisher component. * Include hal_speaker component in build. * Update mb2hal. * Add hal_set_unready(). * Add rtapi_ioperm(). * Add xyzab_tdr 5-axis kins & sample config. * Fix some broken example configs. * Fix spindle-speed in remap. * Clean up handling of canterp. * Update icons. * Fix zombie process detection at startup. * Remove unused procfs_macros.h to avoid copyright concern. * Fix some lintian issues. * Fix debian/copyright. * Fix build on arm and hppa64. * d/patches: disable the boost m4 patch, no longer needed -- Sebastian Kuzminsky Thu, 09 Feb 2023 21:33:18 -0700 linuxcnc (2.9.0~pre0+git20221105.ffb6bda926-1.2) unstable; urgency=medium * Non-maintainer upload. * Updated 0010-arm-hppa.patch from upstream to handle hppa1.1 cpu and to exit build earlier if libboost-python is not found. -- Petter Reinholdtsen Tue, 08 Nov 2022 22:38:32 +0100 linuxcnc (2.9.0~pre0+git20221105.ffb6bda926-1.1) unstable; urgency=medium * Non-maintainer upload. * Added 0010-arm-hppa.patch from upstream to fix build failures on armv8l and hppa64 CPU build daemons. -- Petter Reinholdtsen Tue, 08 Nov 2022 09:55:13 +0100 linuxcnc (2.9.0~pre0+git20221105.ffb6bda926-1) unstable; urgency=medium * New upstream version 2.9.0~pre0+git20221105.ffb6bda926 * Fix an old hm2 encoder index bug. * Fix unloading when halscope crashes. * Lots of improvements to docs & translations. * Improved gmoccapy GUI and QtVCP. * d/changelog: remove duplicated entries -- Sebastian Kuzminsky Sat, 05 Nov 2022 20:48:00 -0600 linuxcnc (2.9.0~pre0+git20221023.7a5beabae0-1) unstable; urgency=medium * New upstream version 2.9.0_pre0+git20221023.7a5beabae0 * Add deb package with German translated docs. * Fix autopkgtest. * Fix build on armhf. * Fix a divide-by-zero bug in the software encoder counter component. * Fix some bugs in carousel component. * Fix exception handling bug in python plugin/sai. * Improve AppStream metadata. * Bump language standards to gnu11 & gnu++17. * Add hm2 oneshot support. * Lots of improvements to the docs & translations. * Improvements to several GUIs. * Add scaled sum component. * Add anglejog component. * Update debian/ files -- Sebastian Kuzminsky Sun, 23 Oct 2022 22:26:38 -0400 linuxcnc (2.9.0~pre0+git20220906.02744cdef6-1) unstable; urgency=medium * New upstream version 2.9.0~pre0+git20220906.02744cdef6 * Fix RPC linking (changed in glibc 2.34-1). * Improve docs. * QtVCP: add API function to remove keybinding. -- Sebastian Kuzminsky Tue, 06 Sep 2022 16:49:06 -0600 linuxcnc (2.9.0~pre0+git20220905.b2e28a88c3-1) unstable; urgency=medium * New upstream version 2.9.0~pre0+git20220905.b2e28a88c3 (Closes: #1019212). * deadzone comp: fix a typo in a HAL pin name. * Misc updates to QtVCP. * Minor fixes to docs. -- Sebastian Kuzminsky Mon, 05 Sep 2022 17:38:14 -0600 linuxcnc (2.9.0~pre0+git20220903.c8c4c539b1-1) unstable; urgency=medium * New upstream version 2.9.0~pre0+git20220903.c8c4c539b1 * regenerate debian/* files using d/configure * Update docs & translations. * QtVCP fixes & improvements. * Work around autopkgtest failure. -- Sebastian Kuzminsky Sat, 03 Sep 2022 16:29:26 -0600 linuxcnc (2.9.0~pre0+git20220827.f7d1c37ffd-1) unstable; urgency=medium * Improved translation infrastructure. * Misc bug fixes and new features. -- Sebastian Kuzminsky Sat, 27 Aug 2022 17:50:53 -0600 linuxcnc (2.9.0~pre0+git20220402.2500863908-4) unstable; urgency=medium * Team upload. * Fixing build-depends - also binary packages need asciidoc to build (Closes: #969416). * Please do not yet use this version in production environments. This upload still aims technical issues to resolve for the next pre-release. -- Steffen Moeller Wed, 06 Apr 2022 16:23:49 +0200 linuxcnc (2.9.0~pre0+git20220402.2500863908-3) unstable; urgency=medium * Team upload. * Failed attempt to build indeps. -- Steffen Moeller Wed, 06 Apr 2022 12:43:17 +0200 linuxcnc (2.9.0~pre0+git20220402.2500863908-2) unstable; urgency=medium * Team upload. * Failed attempt to build indeps. -- Steffen Moeller Sun, 03 Apr 2022 19:20:29 +0200 linuxcnc (2.9.0~pre0+git20220402.2500863908-1) unstable; urgency=medium * Team upload. * First source-only upload to be built across architectures - Update of Classic Ladder to 0.8.10 - Fixes for AppStream -- Steffen Moeller Sun, 03 Apr 2022 16:57:36 +0200 linuxcnc (2.9.0~pre0+git20220224.3ba0951743-1) unstable; urgency=medium * Initial upload that was checked by FTPmasters -- Sebastian Kuzminsky Fri, 25 Feb 2022 18:40:12 +0100 linuxcnc (1:2.8.4) buster; urgency=medium * Add driver support for Mesa 7i96S * Add pncconf support fo Mesa 7i96S * calculatorwidget: increased buttons to be more touch-friendly * gmoccapy: Fix jogging with max velocity (SHIFT + jog key) * Czech translation for Gmoccapy * gmoccapy: fix attribute error in tooltip text * gmoccapy: fix "spindle speed override wasn't applied in reverse direction" * docs: add note to obsolete property 'FEATURES' -- andypugh Sun, 18 Sep 2022 20:33:29 +0100 linuxcnc (1:2.8.3) buster; urgency=low * CraftsmanCNC: A new GUI written from scratch Intended for CNC router applications. * Merge pull request #1706 from hansu/gmoccapy-fix-buttonstate-settings-2.8 * pncconf: add 7i96s * command.c: EMCMOT_JOINT_ABORT set joint jog inactive * Several patches from zz912 to improve translations * Gmoccapy - many updates * PNCconf bug - bad arrow * Update cpu_info.c for Raspberry revision 1.5 * qtvcp -file_manager: fix indent error * task: disallow task mode change if jogging * Fix the building of packages (broken by Japanese docs) * carousel: Fix homing bug. * qtvcp - many updates * docs: added japanese PDF docs from MasaoSakai (https://github.com/MasaoSakai/LinuxCNC) * docs: many updates * docs: make an index.html page for the PDF docs * Merge pull request #1644 from alkabal/alkabal-2.8-xhc-whb04b-6 * Several pull requests from elovalvo/ * Update for new version of Rpi400 * mb2hal: added pins to manpage * Merge pull request #1641 from JTrantow/2.8 * Change EDITOR = geany. Restore more generous dirhold and dirsetup timing. * Updated the gantry example * linuxcncrsh: check for errors when creating listening socket * gscreen -fix error related to keyboard jogging and limit switch * getting-linuxcnc.txt list alternate keyserver * axis.py: stop continuous jogs if mdi tab #1519 * mitsub_vfd docs: several updates * improved german translation * plasmac: many updates * FIxed IRC webclient URL * Update man-pages for latency-* scripts. * Docs: Update RTAI install instructions. * Merge pull request #1234 from LinuxCNC/fix-md5-sum * Update getting-linuxcnc_es.txt * Update getting-linuxcnc-cn.txt * Fix MD5 / SHA256 sums * docs: fix some minor glitches in INI config docs. * Docs add axis lathe info and images * pncconf: several updates * pncconf -raise the stepper timing maximum to 50000 * Merge pull request #1199 from LinuxCNC/shuttle * parport: Clarify messages when parport_pc has not found the device. * Docs: Bump kernel version for RTAI in "Getting LinuxCNC" * shuttle: driver and docs updates * full update xhc-whb04b-6 for 2.8 -- andypugh Tue, 09 Aug 2022 22:13:13 +0100 linuxcnc (1:2.8.2) buster; urgency=low * gladevcp: Numerous Updates * qtvcp -cam_align panel: allow selection of camera number * gmoccapy_3_1_3_8 - many updates * Typo correction Axis.py "Geometry reading" XYZBCUVW > XYZABCUVW * Docs add info on loading halscope * update 2.8 from master for xhc-whb04b-6 * Merge pull request #1024 from kiall/2.8-axis-error-pin * translations - fixed moccapy / gmoccapy errors * Update hostmot2.9 * Fix: update manual SSI * Update abs_encoder.c * add info on installing mesaflash * rx_mode typo in hm2_uart_setup * Docs: Many updates * flipflop: Add an inverted output pin, like the classic D-type latch * pncconf -fix inverting of steppers, in the tune axis test * qtvcp -qtaxis: change controls for lathe configs * pyui -fix commands for joints/axis changes * Docs: Correct pin direction 14 in the parallel port docs * gmoccapy_translations - new translation files * interp_o_word.cc: mdi-opened files leak #1088 * command.c: use consistent external offset epsilon * sendkeys: A HAL component to send keystrokes and UI events * plasmac: fix material verter for sheetcam update * fix halcompile singleton option on userspace components * pncconf -fix internal description of 7i73 mode 1 * pncconf -fix sserial number when parcing XML * pncconf -fix sserial channel number for the 7i96 * Docs: Update URL to updated Pi SD card image. Also document limitations. * Merge pull request #1052 from Hans470/2.8-restructure-hal-doc * pncconf -many uodates * Added new version of Raspberry Pi4 and Raspberry Pi 400 * AXIS: Add an axisui.error pin * qtvcp -qtDragon docs: add a bit of information about probing. * Update near.comp add {} for syntax coherence * PlasmaC: Many Updates * hal_glib -fix check_for_modes always failing * emccanon.cc GET_EXTERNAL_TOOL_SLOT hdl bogus request * Revert bad change inside driver XHC-WHB04B-6 lcnc 2.8 -- andypugh Sun, 20 Jun 2021 18:48:30 +0100 linuxcnc (1:2.8.1) buster; urgency=low * Docs: Updated Chinese "Getting Started" * plasmac: fix conversational path error * hostmot2: Add support for Mesa 7i95, 7i97 and 7c80 * qtvcp -qtdragon: updates * plasmac: Bugfixes * qtvcp -many updates * Forgot to add source file to Makefile * Fix for pre-c99 compilers * hm2_rpspi: remove and reinstate the kernel spi driver at startup/shutdown * plasmac: Don't pierce spotting operations and many other updates * changed pocket_number to mod_pocket in direction logic * motion.9 motion.feed-inhibit gcode only (not jogs) * command.c for consistency, allow jogs if feedhold * control.c joint jogs inhibition if feedhold * userkins.comp (new) userkins using halcompile * gs2_vfd: Fixes how many registers that is written to Closes #506 * Update internal names after file renaming in 2004 Closes #922 * Fix gpio and pin relationship on rpi2 and later Closes #955 * qtvcp -update camview * pncconf -allow different home switch offsets on tandem axes * added hal pin to allow preview refresh * pncconf -raise spinbox limits in tune test * pncconf -fix PID maxerror setting in the tune test for metric machines * Docs: Pi links should be http not https * Docs: Add links to the Raspberry Pi SD card image to the install docs * dbounce.comp (new) alternative debounce component * docs: plasmac user guide update -- andypugh Sun, 29 Nov 2020 14:43:33 +0000 linuxcnc (1:2.8.0) buster; urgency=low * Finally merge "Joints Axes". Joints and cartesian axes are no longer treated as the same thing, making control of robots and non-trivial kinematics significantly tidier. * Add a script to automatically update to the new INI file layout and new HAL pin names. * Multispindle: LinuxCNC now supports up to 9 spindles. * Tandem axes handled properly, including auto-squaring. * Reverse-Run: Negative feed-override will now run the G-code path in reverse. * External Offsets, axes may now be moved from HAL as well as G-code. * increase max tools from 55 to 1000. * Many Trajector Planner improvements. * M98/M99 subprograms: - Support Fanuc-style subroutines * Add G74/G84 floating tap cycles * Enable remap of M62-M68 * Implement G52 offsets * G33.1 Rigid Tapping speedup, with optional faster return move * pentakins kinematics. * trivkins now allows arbitrary mapping of axes to joints. * dh-parameters.txt doc (with graphics for rv-6sl) * corexy sims: demonstrate two methods * kins: add scorbot-kins * rotarydelta config with simulation * Rotary delta kinematics * QTvcp: New QT-based VCP framework * QTdragon, QTlathe, QTtouchy, QTscreen - new GUIs based on QTVP * Silverdragon: New gscreen based GUI * plasmac: New full-featured Plasma cutter controller * Back tool lathe support in axis and gmoccapy * Many Axis improvements * Many Gmoccapy improvements * stepconf - various improvements * pncconf - many improvements * Much enlarged new Spanish language translations * it.po: New Italian translation file. * Improve German translation * Add international support for classicladder * Added Chinese translations for some docs * Some new French translations * Mesa 7i96 support added * RPi4 fixes and Mesa 7C80/7C81 board additions * hal_pi_gpio: Add a HAL driver for Raspberry Pi GPIO * hal_bb_gpio: new hardware driver for BeagleBone Black GPIO * add ohmic.comp plus supporting documentation * demux: A new HAL component * Create Spindle_monitor.comp * thermistor comp: * limit3.comp add enable pin * pmx485: New component, Modbus comms to PowerMax Plasma cutter * add a driver for the Huanyang GT series VFD * mitsub_vfd -add a driver for Mitsubishi VFDs * xhc_whb04b-6: New HAL driver for the xhc-whb04b-6 pendant * rtapi: add a halcmd command to set the messaging level * Touchy: Allow re-homing and unhoming in JA systems. * G33.1 Fix for #639 & #703 * bldc_hall3: Remove bldc_hall3 as it is more than replaced by bldc. * homing - support absolute encoders for homing * remove limit of bits from weighted sum component * FEATURES: Convert the [RS274NGC] FEATURES bitmask to INI entries * Contour Shuttle: Add vendor ID etc for ShuttleProV2 * halcompile: Allow userspace component compile with RTAI * iocontrols tool_number and interps current_tool now return the same value, as expected and documented * halcompile: Document extra_compile_args * Make amp-enable go false when kinematics fails. https://github.com/LinuxCNC/linuxcnc/issues/655 * Axis preview improved with wrapped rotary axis. * Many other Axis UI improvements * glcanon -Make the cone size adjustable via INI * docs -Add modbus message info for Classicladder * Add FF3 term to PID * carousel.comp: Many updates including fwd-rev duty cycles, parity * mesa_uart.comp: Fix a long-standing names bug. * python-interface.txt: expand jog parameters defs * BUGFIX: hostmot2 encoder quadrature error reporting bug. Previous to this patch the quadrature errors were not reported correctly and could be lost. * sserial,c: Don't report "remote error" as the error when there is a remote error https://github.com/LinuxCNC/linuxcnc/issues/439 * halcompile: MAX_PERSONALITIES=64, docs update * Module to send notifications over DBus to the system notification server * mux_generic: Fix some long-standing bugs * Add spindle.N.amp-fault-in pins to motion, to report spindle amplifier faults * pid: use command-deriv when supplied * Hostmot2 / resolver.c Add the option to fake absolute encoders with resolvers * gremlin_view.py: improve standalone focus behavior * puma_cube.ini new introductory sim config * lcd.c - fix a read out of bounds bug * docs: add missing num_sserials info to hm2 manpage * docs: add G20/G21 unit info to G-code Quick Ref * Vismach / Puma: Make the Puma simulator geometry match the kinematics. * limit3: add .in-limit pin * homing:describe home_sequence startnum restriction * hm2_eth: add support for Mesa 7i93 AnyIO ethernet board * add support for float values in the sserial driver. * GladeVCP - CombiDRO - bugfixes * siggen.c: add reset pin * Tooledit fixes * Hostmot2 Absolute Encoders: Add a flag to inhibit encoder wrapping. * latency-histogram: new option (--nox) for no X gui * update_ini: Script to auto-convert configs to the Joints-Axes format * rtapi: Add rtapi_open_as_root API * uspace: add uspace+xenomai realtime * uspace: add uspace+rtai realtime * add a sample config for the scorbot-er-3 robot arm * docs: document AXIS's foam mode -- andypugh Sun, 12 Jul 2020 20:29:54 +0100 linuxcnc (1:2.8.0~pre1) rosa; urgency=low * New external axis offsets * New support for Mesa 7i96 ethernet card * New experimental QT based VCP * New G52 local coordinate system offset * New support for multiple spindles up to 9 * G33.1 Rigid Tapping speedup, with optional faster return move * Back tool lathe support in axis and gmoccapy * Separate joint and axis limits for non trivial kins machines * bldc_hall removed: use bldc -- Sebastian Kuzminsky Sun, 26 Oct 2014 23:18:24 -0600 linuxcnc (1:2.7.15) unstable; urgency=medium * gaxis: use the theme that was made for it * gmoccapy: fix unit change behavior (G20/G21) * gmoccapy: fix offsetpage closing after editing one cell * gscreen: show linked themes * gscreen: fix error when selecting run-from-line startpoint * gscreen: fix user message feature * gladevcp: fix a bug with ProgressBar widget * gladevcp: fix mode error in MDIHistory widget * image-to-gcode: fix a startup crash on newer distros * stepconf: fix simulated parport invert pin error * pncconf: don't refer to kernel_version when not is_kernelspace (closes #159) * pncconf: set PID maxerror reasonably on both imperial and metric machines * pncconf: fix translations * pncconf: fix maximise script for AXIS * emccalib: fix parsing ini HALFILE=file items (fixes servo tuning in Axis GUI etc) * hostmot2: fix a tram bug mostly affecting bspi (closes #451) * pid: use command-deriv when supplied * mux_generic: fix some long-standing bugs * time component: add pause pin to pause timing while code is paused * mb2hal: add support for libmodbus 3.1.2 and newer * hy_gy_vfd: fix modbus byte timeout * hm2 encoder: fix a quadrature error reporting bug * hm2 sserial: fix "remote error" reporting (closes #439) * hm2 muxed encoder: fix deskew bug (closes #394) * mesa_uart component: fix an old bug with name handling * tcl hallib: fix a bug in get_netlist * vismach: fix import of ASCII STLs * sample configs: add vismach 3 axis mill example * sample configs: use user-friendly tool table editor * sample configs: fix `ok_for_mdi()` example Python function homing check * docs: fix misc typos and broken links * docs: [TRAJ]LINEAR_UNITS must be either mm or inch * docs: pwmgen has all pins now, no params * docs: improve lowpass manpage * docs: improve vismach example * docs: improve pyvcp container info * docs: add a pyvcp example * docs: fix incorrect pin names in hostmot2 manpage * docs: improve O-word examples & docs * docs: fix & improve G28, G30, and G92 * docs: improve G38 & probe result params * docs: improve restart description in M0/M1 docs * docs: improve M7, M8, and M9 * docs: add a link to the web forum to About LinuxCNC * docs: fix command for launching pyvcp example * docs: add component usage information to halcomp docs * docs: add arc tolerance ini settings * docs: improve backlash & screw compensation docs * docs: improve python UI library docs * docs: fix #<_coord_system> values * docs: fix indentation in remap docs example * docs: fix broken link in comments of comp311.ngc example program * docs: add missing info about motion.motion-type to Core Components * docs: clarify o-word subroutine effects * docs: update links to point at new Wheezy ISO * docs: fix a broken link in French docs * docs: fix German translation (fixes #597) * docs: fix homing docs about HOME_FINAL_VEL * Interp: fix MDI calls after sub updated (fixes #455) * Interp: fix motion after Abort (fixes #579) * TP: fix fallback to parabolic blending when tangent blend fails (fixes #477) * TP: fix accel violation with G96 and arc blending * TP: fix exact-stop when falling back to alternative blend methods * TP: fix accel violations with near-tangent segments (fixes #546) * TP: apply minimum displacement checks consistently (fixes #550) * RTAPI: allow rtapi to compile with kernel 4.14+ * make better use of autoconfigured `grep` executable in scripts * scripts/linuxcnc: run better in Docker * scripts/linuxcnc: fix cleanup log messages * simulate_probe: rebrand EMC -> LinuxCNC in error messages * clean up and modernize out use of yapps (for halcompile) * better build & packaging support for Debian 10 "Buster" * packaging: don't depend on python-gnome2 * remove unused program halgui * fix compile error in C99 mode * build system: require `intltool-extract` executable * build system: support Ubuntu 16.04 and 18.04, and LinuxMint 18.* and 19.* * tests: add an Interp test of G33.1 * tests: add an Interp test for issue #455 * travis: use ccache -- Sebastian Kuzminsky Thu, 02 Jan 2020 11:59:23 -0700 linuxcnc (1:2.7.14) unstable; urgency=medium * docs: improve motion.requested-vel description * stepconf: fix wrong stepgen number in lathe config * pncconf: only put firmware directory info for cards that need it * pncconf: fix typo for loading second 7i80 * pncconf: fix firmware data typo 7i92-7i76_with one 7i76 * pncconf: add 7i92-7i77_7i76 firmware data -- Sebastian Kuzminsky Mon, 18 Jun 2018 12:22:48 -0600 linuxcnc (1:2.7.13) unstable; urgency=medium * docs: correct g33.1 warning and text * docs: describe motion.program-line in motion manpage * docs: remove last mention of pins from PID description in rtcomps * docs: update the PID section of rtcomps (#388) * docs: add missing num_sserials info to hm2 manpage * docs: add missing .tool-prep-index parameter to io manpage * docs: add some docstrings to the linuxcnc python module * docs: make the tool table docs more findable * docs: fix a spelling error in bldc manpage * docs: M19 is no longer an unused M-code * axis GUI: fix file open dialog with recent py/tcl (#414) * gscreen industrial GUI: fix DRO display if VCP panel added * gscreen GUI: fix error if gstreamer library missing * stepconf: fix lathe configs; Z axis must be 2 not 1 * pncconf: fix lathe configs z axis should be 2 not 1 * pncconf: fix tandem stepper command signals * pncconf: fix control type with tandem axes * gladevcp: fix a warning about icon size * interp: require < after # for named parameters (#424) * hm2 7i90: fix indentation for legibility * halrmt: fix confusing indentation * classicladder: fix indentation * io: fix a misleading comment * io: update the status buffer when prepping the loaded tool * io: set the HAL pins/params even for the loaded tool * io: remove an incorrect debug message * test: add tests of reloading the loaded tool * test: add a test for interp variable name bug (#424) * packaging: use dh_prep instead of deprecated 'dh_clean -k' * packaging: remove trailing whitespace in changelog * packaging: note copyright on yapps -- Sebastian Kuzminsky Tue, 08 May 2018 21:12:41 -0600 linuxcnc (1:2.7.12) unstable; urgency=medium * docs: clean up net commands in orient docs * docs: fix hyphen/minus confusion in manpages * docs: fix axis name error in gmoccapy "Probe Information" * docs: add G20/G21 unit info to G-code Quick Ref * docs: make G96/G97 comments consistent * docs: [TRAJ]HOME is ignored on trivial kinematics machines * docs: fix a typo in mux_generic manpage * docs: improve docstring for `linuxcnc.wait_complete()` * docs: improve .motion-type pin info in motion manpage * docs: add G99 to G-code Quick Ref * docs: new Chinese translations * docs: fixup capitalization of variables in Homing docs * docs: clarify valid values of HOME_OFFSET * docs: add Chinese translation * docs: improve milltask manpage * docs: remove mention of ancient "bfloat" program from hm2_7i43 manpage * docs: fix typos here and there * axis gui: remove a startup-time debug message * axis gui: fix cursor keys in MDI window * axis gui: add 'Select Max velocity' key bindings in quick ref * axis gui: fix jog speed key bindings (#268) * axis gui: don't try to convert unicode to unicode * gmoccapy gui: fix bug with lathe DRO size and missing gst * gscreen gui: fix DRO display with VCP in 'industrial' config * limit3: complete rewrite, much better behavior * stepconf: restore translation * pncconf: fix stepgen MAXVEL and MAXACCEL setting with backlash * pncconf: add internal firmware for g540x2 * pncconf: add internal data for 7i92 and 7i80HD cards * pncconf: restore translation * hm2: stop a spurious "IOPort ignored" warning * hm2: fix a copy/paste bug in an error message * hm2 sserial: quiet excessive warning messages * hm2 sserial: fix bug with spurious port shutdown * hm2 dpll: fix even-numbered timers (#211) * hm2 7i34, 7i90: don't silently fail with blank config strings * puma: update puma kins, vismach model, and configs for D6 joint * glcanon: fix a "DRO disappears" bug with wrapped rotaries * linuxcnctop: decrease CPU usage and memory leakiness * linuxcnctop: split long lines at whitespace * linuxcnctop: fix display of some sequence-type data * sim_pin: improve help for signals with no writers * motion: cancel unlock requests when motion disabled * rtapi: fix a sched_setaffinity error on uspace with old glibc * tests: protect sim.var file, dpkg removes *.orig * tests: increased coverage of limit3 tests * src/configure: verify python's pango & cairo modules are installed * build: rebuild gmoccapy.pot * fix a typo in maintainer docs * packaging: add Keywords to all .desktop files * packaging: validate desktop files * packaging: update debian/copyright to conform to DEP-5 * packaging: improve short descriptions * packaging: build-depend on intltool (for building gmoccapy.pot) -- Sebastian Kuzminsky Wed, 24 Jan 2018 21:59:53 -0700 linuxcnc (1:2.7.11) unstable; urgency=medium * doc changes for the transition to github * carousel: fix a bug with tool number of zero * axis/gremlin: a better way to avoid leaking files * test that the Python interpreter prints the right errors -- Sebastian Kuzminsky Thu, 27 Jul 2017 22:36:58 -0600 linuxcnc (1:2.7.10) unstable; urgency=medium * docs: document [EMCMOT]COMM_TIMEOUT * docs: teach buildsystem to generate manpages from asciidoc source * docs: add info about the Touchy radio buttons * docs: improve some hm2_bspi manpages * gmoccapy: added Num_Pad jogging * image-to-gcode: work around gratuitous breakage in PIL * GladeVCP: don't exit if CombiDRO fails to poll status * hy_vfd: add --motor-poles, to set PD143 * hy_vfd: add --base-frequency to set PD004 on the VFD * hy_vfd: document PD004/base-freq better in the manpage * hy_vfd: fix some typos in --help output and comments * add a driver for the Huanyang GT series VFD * hm2_eth: add support for Mesa 7i93 AnyIO ethernet board * hm2_sserial: Fix a bug where the second port would not work if the first was disabled * gcodemodule: make interp really close part program * pluto: use rtapi's fabs() instead of the kernel's abs() * steptest: don't change position-cmd when not running * uspace: find top online CPU * tests: make timeouts simpler & smarter in halui/jogging test * build: fix building linuxcnc.1 when docs not requested * build: don't fail when requested not to build documentation * build: ensure asciidoc manpages are built before checklink is run * build: build-depend on asciidoc-dblatex on debian stretch * build: on Debian Stretch and newer, depend on gstreamer 1.0 * build: add debian/configure stanza for debian stretch * build: rename the GS2 VFD Makefile variables for clarity -- Sebastian Kuzminsky Tue, 18 Jul 2017 21:02:57 -0600 linuxcnc (1:2.7.9) unstable; urgency=medium * support "auxiliary apps", distributed separately from LinuxCNC * docs: add a bit more info to position feedback ini setting * docs: sort board list in hm2_eth manpage * docs: fix pyvcp multi label description * docs: fix pyvcp example so it runs * docs: clarify return value in hal_pin_new(3) manpage * docs: add missing var section to index header * docs: add machine building info to integrator document * docs: add manpage for hal_parport realtime component * docs: add units info to halui max-velocity pins in manpage * docs: flesh out max-velocity pins in halui manpage * docs: fix incorrect info for stat.motion_type and stat.motion_mode * docs: code notes: a pose has 9 coordinates, not 6 * docs: add hal_manualtoolchange manpage * docs: add info about remap debug messages * docs: fix paraport/parport typos * docs: fix pin names in thcud manpage example HAL config * docs: clean up the note about T0 handling * docs: add some info for the hal python module * docs: clarify an ambiguity about siggen in the HAL documentation * docs: add information about addf command in the HAL documentation * docs: add details on epp_dir command line parameter of hal_ppmc * docs: remove a footnote about the behavior of emc2 v2.4 * docs: add or2 example * docs: fix description of USER_DEFINED_FUNCTION_MAX_DIRS in ini-config * docs: clarify g28/30 description * docs: add link to G54-G59.3 User Coordinates section * docs: clean up Machine Coordinate System section * docs: remove M6 from modal group description * docs: add links to machine origin from several places * docs: fix typos and markup problems all over * docs: add more information about the addf command * docs: sorted gmoccapy video links with headlines * docs: add a known problem with macros to gmoccapy docs * docs: fix cut-n-paste bug in mb2hal manpage * docs: expand on different ways of starting LinuxCNC * docs: document some features of the Axis GUI * docs: add info about the basic directory structure * docs: correct misleading descriptions of named parameters * docs: update info about 'save' command in halcmd manpage & help * Axis GUI: avoid unbounded memory growth in text widgets on stretch * Axis GUI: make tool info display widget larger * Axis GUI: remove unused .info.offset widget * Axis GUI: shorten tool touch off widget title text * gmoccapy GUI: removed unused code * gmoccapy GUI: added get_joints_amount() for compatibility 2.7 and master * gmoccapy GUI: new hal pin gmoccapy.ignore-limits * gmoccapy GUI: bug if no macros in ini file * gmoccapy GUI: bug in macro button handling * gmoccapy GUI: G96 bug solved * gscreen GUI: fix missing .themes folder error * halui: fix halui.program.run * gladeVCP: make CombiDRO compatible for both 2.7 and master * gladeVCP: fix delta scale pin not updating if wheel scroll used * gladeVCP: add missing icon image for hal_dial * pncconf: fix spindle command using wrong signal name * pncconf: fix sserial mode setting in HAL file * hal_ppmc: add command line arg to turn on/off port direction change * mitsub_vfd: add a driver for Mitsubishi VFDs * classicladder: fix sequential variable access * classicladder: fix whitespace errors * ilowpass: round the output instead of truncating * halcmd: waitusr: avoid race condition * hm2: better error message on unexpected pin descriptors * hm2_eth: don't segfault on interfaces without addresses * linuxcnc python module: add doc string for stat.motion_mode * linuxcnc python module: add doc string for stat.motion_type * linuxcnc python module: add a doc string for stat.queued_mdi_commands * linuxcnc python module: add EMC_MOTION_TYPE_* constants * hal python module: better doc strings for connect() and new_sig() * Interp: fix a typo in a cutter-comp error message * Task: set the stat struct member queuedMDIcommands * example G-code: fix Z value reported by rectangle_probe.ngc * example configs: fix hal pin names in gmoccapy_plasma * example configs: limit led without off color in gmoccapy_plasma * example configs: xhc-hb04.tcl: if prior connects, continue with msg * rtapi: better error message when failing to connect * uspace: allow calculated parameter array sizes * tests: let introspection complete before continuing in the t0 tests * tests: fixup hm2-idrom test to match new hm2 PD error message * tests: add a test of ilowpass with low gain * tests: reorg ilowpass test so i can add a low-gain test next to it * tests: add a test of stat.queued_mdi_commands * travis: manually uninstall gpl3 readline * build: fix link error on i686 with gcc, or maybe objcopy 2.27 * packaging: add the new LinuxCNC_Integrator pdf to the doc package -- Sebastian Kuzminsky Fri, 02 Jun 2017 12:49:44 -0600 linuxcnc (1:2.7.8) unstable; urgency=medium * docs: fix pdf duplicate history listing * docs: use out-of-date French translation of Updating LinuxCNC * docs: fix broken links in Spanish translation of html index * docs: fix broken links in French translation of html index * docs: INI File settings added some gmoccapy stuff * docs: punctuation fixes in Updating LinuxCNC * docs: add more info about program extensions * docs: add links to both NIST papers * docs: clarify feed rate info * docs: update g61 for the new trajectory planner * docs: remove byte-order-mark from linux-faq-es.txt * docs: elbpcom manpage fix: default address is 192.168.1.121 * docs: add info about tool_table and example code * docs: add info about python module return types and constants * docs: fix asciidoc markup * docs build system: accept id tags in more elements * docs build system: add missing dependency * docs build system: remove obsolete makefile rules * gmoccapy: use INI Entry CYCLE_TIME as poll interval * gmoccapy: cosmetic and double entry * gmoccapy: subroutine bug solved * gmoccapy: check for INI entry DEFAULT_SPINDLE_SPEED * gmoccapy: bug fix halui spindle override * gmoccapy: bug in halui.spindle-override.increase * GladeVCP - CombiDRO - new property cycle time * canon: return correct feed rate in G95 mode * glcanon: make the grid stay in the machine limits box * glcanon: fix position of the machine limits box * glcanon: fix red boxed constraint numbers in AXIS preview * linuxcnc python module: add doc string for s.settings * twopass bugfix: support all ini var substitutions * image-to-gcode: compensate for incompatible changes in numpy * latency-histogram: more info in error message * interp: fix bug 160, surprise motion after g41/no move/g40 * interp: revert "move end-of-program cleanup code to its own function" * interp: after syncing settings from canon, update all copies of the info * interp: fix incorrect `_setup.sequence_number` after remaps * task: fix race condition queueing MDI queue busters * tests: add an abort-vs-feed-rate test * tests: add a motion-logger S-word test * tests: add `mdi-while-queuebuster-waitflag` test * tests: add Z axis to `interp/g10/g10-l1-l10` tests * tests: remove `g10-l1` test, identical to `g10-l1-10` * tests: specify var filename in interp compile test * tests: add a test of early exit from cutter comp * tests: add a test demonstrating a remap bug * tests: do what the README says in `nested-remaps-oword` test * remove note about defunct weblate service -- Sebastian Kuzminsky Tue, 08 Nov 2016 20:42:02 -0700 linuxcnc (1:2.7.7) unstable; urgency=medium * docs: fix example scripts so they work when copied and pasted * docs: fix minor mux_generic(9) manpage quibbles * Axis GUI: work around python-tk "True" bug * halui: correctly report "mode.is_joint" * lcd: stop processing when page_num is too high * lcd: add missing call to hal_ready * pncconf: add ability to set gs2 vfd serial device * Interp: support subs placed after main program * Interp: don't drop remap level at prog exit * Interp: fix startup regression regarding coordinate systems and more * add test validating initial coordinate system and RS274NGC_STARTUP_CODE * add test validating the startup state of the Status buffer * add test for M30 and remapped command interaction * travis-ci: Disable e-mail notifications * build: include metadata for Travis CI integration -- Sebastian Kuzminsky Wed, 07 Sep 2016 19:00:54 -0600 linuxcnc (1:2.7.6) unstable; urgency=medium * docs: add info about updating * docs: fix a typo in gcode overview * docs: remove a cut and paste error * axis: add keyboard shortcut to open the menu to quick reference * gmoccapy: fix bug in user tabs button * gmoccapy: fix bug in initialize optional stops * gmoccapy: added the bugfix from 1.5.6.2.1 * hostmot2: improve handling of packet loss for hm2 ethernet cards * wj200 vfd driver: fix segfault * thcud component: doc fixes * sample configs: fix typo in plasma-thc-sim config * Task: Revert ill-advised stale-statbuffer fix added in 2.7.5. This should fix "linuxcnc hangs when limit switch trips" and other problems. * motion: when motion disables, mark all joints as "in position" * test: add a hard limit test * interp list: log calls to clear() when debugging -- Sebastian Kuzminsky Sat, 30 Jul 2016 23:54:47 -0600 linuxcnc (1:2.7.5) unstable; urgency=medium * docs: update GladeVCP SpeedControl * docs: fix a typo in example gcode * docs: add some detail to Getting LinuxCNC * docs: clarify the intro to the python-interface documentation * docs: fix typo in python-interface docs * docs: fix information about opening a terminal * docs: add info about non network updates to Updating LinuxCNC * docs: update location of ISOs in Getting LinuxCNC * docs: fix command to add an apt source to Getting LinuxCNC * docs: fix typo in Getting Started guide * docs: new GladeVCP widget SpeedControl * docs: remove outdated remap information * docs: add more info on Classic Ladder compare and groups * docs: add info to pncconfig docs about editing a config * hm2_eth manpage: note the irq-coalesce trick * hal_input manpage: don't try to document udev rules syntax * linuxcncrsh manpage: remove wrong info about open G-code files * Axis GUI: fix File/Open on ini files with no [DISPLAY]PROGRAM_PREFIX * gmoccapy: small bug fixes (iconview and handlers) * gmoccapy: bugfix caused due to rests of alarm page * tklinuxcnc GUI: rebranding * carousel comp: Fix a bad initialisation in index mode * gantry comp: fix typo in docs * wj200 comp: warn on unhandled command-line arguments * xhc-hb04: accommodate prior connections to the motion.spindle-speed-out-rps-abs pin * shuttlexpress: clean up the manpage & asciidocs * GladeVCP: SpeedControl - changing limits do reset the increment * GladeVCP: SpeedControl - set default increment after setting a new adjustment * GladeVCP: SpeedControl - added widget icon * GladeVCP: tooledit.glade - corrected typo * GladeVCP: hal_sourceview - fix permissions of created files * GladevCP: gremlin - bugfix mouse button modes 4 and 6 * GladeVCP: IconView - Bug due to double click * GladeVCP: Iconview - sensitivity bugfix * GladeVCP: Fix mdi error with tiny values * pyngcgui: find gcmc if not specified in ini * pyngcgui: remove mention of incorrect --height argument * hal_glib: add callLevel to EMC_TASK_STAT class, to fix file-loaded bug * stepconf: fix default pitch for A axis * stepconf: dynamically show how step scale is calculated * pncconf: add support for 5i24 * pncconf: fix GUI's jog default settings * pncconf: fix user created stepper names error * pncconf: fix halui commands error * pncconf: fix spindle feedback signal error * pncconf: fix spindle display not working with encoder * pncconf: fix wrong inverted step/direction pin * pncconf: fix axis tests with invert step/pwm pins * pncconf: PID P calculation was wrong for steppers * pncconf: set PID P to a better default for stepper systems * pncconf: fix error when selecting both-home-x or y or * Pico configs: add lots of documenting comments * Pico configs: update format of tool table * configs: let it trigger a gladevcp bug * GM6-PCI driver: add support for PCI SubDevice ID 0x6ACC * rs274: work around boost::python bug * rs274: implement makeInterp for external users of librs274 * interp: consistently set feed rate to 0 on M2/M30 * interp: don't return potentially stacked data * interp: fix message for INTERP_FILE_NOT_OPEN (fixes #63) * interp: reset Interp and Canon state on Abort * interp: move end-of-program cleanup code to its own function * interp: fix build errors on Ubuntu 16.04 * interp: don't return potentially stacked data * Task: fix a recent "surprise motion on abort" bug * Task: Fix serial number handling after 516deaef * Task: add drain_interp_list * Task: simplify handling of emcCommand * Task: only turn off the spindle once, when entering Estop * Task: only call emcTaskPlanInit() once during startup * Task: don't call emcAbortCleanup() in emcIoAbort() * Task: fixup indentation * rtapi (sim): flush stdout/stderr after rtapi_print() * rtapi parport: make all inline functions static * motion: remove overruns parameter * motion: remove heuristic delay warning * linuxcncsrv: ioctl(FIONREAD) wants int*, not ulong* * glcanon: is_lathe() is a function * HAL: fix comments describing HAL thread & funct times * tests: longer timeout in halui mdi test * tests: hm2-idrom: exit early when a test fails * tests: compile an example user of librs274 * tests: add comments to motion-logger/basic 'expected' file * tests: add a test of STARTUP_GCODE vs Abort * tests: add a test to reproduce the g5x/abort preview problem * src/configure: detect potential readline license conflict * src/configure: fix a typo in a hep message * debian/configure: modernize usage/help message * debian/configure: add info about kernel * platform-is-supported: detect OS in a more portable way * rip-environment: rebranding * build: make failure copying images an error * packaging: interface with udev better -- Sebastian Kuzminsky Tue, 12 Jul 2016 21:47:18 -0600 linuxcnc (1:2.7.4) unstable; urgency=medium * docs: update hm2_eth manpage with supported boards * docs: fix hostmot2 manpage markup * docs: update gs2 vfd docs with new command-line args * docs: update pyvcp docs (labels, leds, buttons) * docs: improve info on installing preempt-rt kernel * docs: add warning about entering a root password during install * docs: improve contributing instructions * docs: add a bit more info on ngcgui * docs: update max AIO from 16 to 64 in motion manpage * docs: update homing diagram (dxf and image) * docs: clarify homing variable names * docs: add missing keyboard short cuts to Axis documentation * docs: clarify what "option userspace yes" means to halcompile * docs: add info about min and max soft limits * docs: add mb2hal manpage and documentation * docs: add a link to the github bug tracker * docs: github is more official now * docs: fix a broken links * docs: fix a couple of places to note nine axes or planes supported * docs: add info on how to stop the Axis GUI "do you really want to quit" dialog * docs: add info about examples of logging from G-code * docs: make example code easier to cut and paste * docs: fix descriptions for G43.1 and G43.2 * docs: acknowledge Debian and UBUNTU trademarks * docs: fix incorrect example syntax and typo * docs: fix manpage markup bug in rtapi_app_{main,exit}.3rtapi * docs: describe the new gladevcp iconview signal "sensitive" * docs: add info about the rs274 stand alone interpreter * docs: fix level offset in pdf docs * docs: remove jessie rt-preempt kernel instructions * docs: use a longer GPG keyy fingerprint * docs: minor fixed in gmoccapy docs * docs: restore line numbers in example G-code * Axis GUI: add missing keyboard short cuts to help quick reference * gmoccapy: fix dangerous bug in jogging with keyboard * gmoccapy: deleted alarm entry and added new settings for combi_dro * gmoccapy: small bug fix in hal jogging and fixed a typo * gmoccapy: stay synchronized with iconview widget button states * gscreen: fix industrial skin's A axis DTO readout * Mini GUI: remove duplicate geo mgmt of widget * keystick UI: fix signal handler a second time * gladevcp: fix hal_dial for wheezy * gladevcp: hide error message from hal_lightbutton * gladevcp: iconview could create exception in some circumstances * gladevcp: offset_widget: fix rare error of non-existent var file * add gantry.comp from Charles Steinkuehler * xhc-hb04: fix negative jogs on non-x86 architectures * hostmot2: improved sserial error handling (don't crash) * hy-vfd: set spindle_at_speed correctly when spindle is running reverse * serport: fix pin-1-in-not * sim_parport: fix pin names of inverted input * stepconf: fix error when using inverted pins on sim config * pncconf: fix spindle setting controls not showing sometimes * pncconf: fix setting or PID maxerror on servo configs * sample configs: make sim/canterp.ini runnable * sample configs: connect the orient mode pin to allow rotation direction to be controlled in the VMC Vismach model * emcmodule: Fix incorrect memory access by PyArg_ParseTuple and add better checks for string arguments * interp: fix two error message typos that would lead a user astray * support RTAI 5 * better error reporting in rtapi/sim * realtime script: wait for the last rtapi_app to die when stopping realtime * tests: verify that the exported realtime math functions exist * build: remove unsupported docs/src/Makefile * build: build-depend on docbook-xsl, instead of using the network at build-time * packaging: include udev rule file for ShuttleXpress USB jog pendant * packaging: gmoccapy depends on gstreamer0.10-plugins-base * packaging: use "set -e" to fail on error in the postinst script * remove stray execute permissions -- Sebastian Kuzminsky Sun, 07 Feb 2016 22:30:01 -0700 linuxcnc (1:2.7.3) unstable; urgency=medium * docs: update install instructions for glade * docs: correct description of m19 feedback requirements * docs: clarify some pins in the halui manpage * docs: fix link to the giteveryday(1) manpage * docs: combine jog wheel information to one place * docs: minor changes to gmoccapy documentation * docs: fix links in Gcode Quick Reference (English and French) * gmoccapy: document updates and deleted some pin * halui: fix some jogging bugs * halui: fix a copy-paste error that could prevent homing * tooledit_widget.py: tool diameter sorting fix * hal: don't segfault if rtapi_init() fails * rtapi: error messages are better than errno numbers * tp: purge old circle length function * tp: overhaul spiral fit computation to use more numerically stable quadratic formula * tp: fix for arc-arc coplanar check * bugfix: Start line and remap interaction * interp: it's nonsense to take a boost::cref(this) * build system: verify links in the Gcode Quick Reference documents * linuxcnc launch script: export LINUXCNC_NCFILES_DIR * rip-environment: export LINUXCNC_VERSION * halui/jogging test: change which joint is selected while jogging * tests: test homing in halui/jogging * tests: add a motion-logger test of a remap bug -- Sebastian Kuzminsky Sun, 29 Nov 2015 12:51:49 -0700 linuxcnc (1:2.7.2) unstable; urgency=low * docs: improve parport docs * hm2_7i90 manpage: clarify firmware management * hm2_7i90 manpage: remove incorrect EPP info * interp: fix an old bug in canned cycle preliminary & in-between moves * sample configs: fix homing in sim/axis/halui_pyvcp * sample configs: fix homing in sim/axis/classicladder * realtime script: wait for the last rtapi_app to die when stopping realtime * tests: add an interpreter test of G81 * tests: add motion-logger, a debugging tool * motion: motion_debug.h needs to include motion.h -- Sebastian Kuzminsky Sun, 01 Nov 2015 10:07:24 -0700 linuxcnc (1:2.7.1) wheezy; urgency=low * docs: correct and expand description of #<_coord_system> * docs: clarify "Updating from 2.6 to 2.7" * docs: fix misc markup issues, typos, and minor issues * docs: add more information about parallel ports * docs: remove duplicate include * docs: clarify dmesg info in Linux FAQ * docs: update the desktop menus * docs: add info on using % to wrap G-code files * docs: update code notes on M61 * docs: add link to upgrade page from 2.5 to 2.6 * docs: show complete ini entry names for homing * docs: fix display of terminal commands in pdf viewers * docs: clarify G2 and G3 with R and P * docs: document hal alias APIs with manpages * docs: hostmot2 manpage fixes * docs: update checksums for new Wheezy image containing 2.7.0 * gmoccapy: fix single stepping bug * gmoccapy: bug in tool info handling with tool number being "-1" * gmoccapy: bug in handling tool info with tool being "-1" * update copyright dates for AXIS and Touchy * gremlin: improve ini file find * ngcgui: improve ini file find * ngcgui: fix fullscreen regression * pncconf: fix spindle control signals * pncconf: fix spindle control error * pncconf: fix HAL file - VFD always being selected * hm2_eth: don't just crash when packets get lost * toggle2nist: does not require floating-point * xhc-hb04: honor mpg_accels for all manual_mode jogs * xhc-hb04: fix output scaling * xhc_hb04: update man page text * xhc-hb04: support twopass usage * hy-vfd: set P144 correctly * gs2 vfd: add support for configs that power off the VFD on E-stop * fix bug #439, non-NCD arcs on machines with ABCUVW axes * motion: set the "In Position" emcmot status flag when aborting * add option to disable line number reset in hal_sourceview when idle * build system: make the git scripts more user friendly * tp: fix warning: function declaration isn't a prototype * uspace_rtapi_app: clean up on failed "realtime" module load * task: fix a compile warning (heartbeat is unsigned long) * io: "no tool" is spelled "0", not "-1" * io: fix HAL pins on "M61 Q0" * hal_lib: actually export hal_xxx_alias * tests: add a lathe test * tests: add another loadrt test * tests: add "spindle unloading" to m61 test -- Sebastian Kuzminsky Sat, 17 Oct 2015 21:07:44 -0600 linuxcnc (1:2.7.0) wheezy; urgency=low * docs: add jessie rtpreempt install instructions * docs: clean up Gscreen GUI docs and add to html and pdf * docs: make the Hungarian translation of Gmoccapy stand out better * docs: update the GFDL blurb * docs: fix html validation errors * docs: make the html docs remember what was open * docs: fix typo in pyvcp example * docs: add missing pyvcp parameter and misc clean up * docs: remove note about 2.5.0 * docs: refresh Axis GUI screenshot * docs: fix a copy/paste error in hy-vfd manpage * docs: add hy-vfd HAL interface change to "Updating LinuxCNC" docs * docs: remove tool tips from html landing page * docs: fix html landing page for non-javascript browsers * docs: fix expand/collapse in html docs * docs: fix a broken link in Spanish Master Document * docs: misc minor cleanups * touchy: G64 now takes optional Q * gscreen: add info about theme support to docs * gscreen: add a local theme suited to touchscreens * gscreen: add local theme capability * gaxis: name some widgets so the theme can see them * gaxis: use Override widgets for overrides * gladevcp: add override slider widget * add support for TCL halfiles in [HAL]POSTGUI_HALFILE ini settings * hostmot2: remove pet_watchdog hal function, as per the prophecy * hostmot2: change default dpll time constant to avoid following errors from ntp * thcud: fix manpage formatting * thc component: add pin to show current offset * latency-plot: don't depend on a specific wish interpreter * packaging: switch to dh_python2 on Jessie and later * packaging: libgnomeprintui2.2 is not available on Debian Jessie * packaging: allow sample configs in /usr/share/doc/linuxcnc/examples to run -- Sebastian Kuzminsky Sat, 05 Sep 2015 14:15:27 -0600 linuxcnc (1:2.7.0~pre7) wheezy; urgency=low * docs now use expanding/collapsing layout * docs: lots of fixes and cleanup * docs: fix incorrect image width in pdf docs * docs: add info on Vismach * docs: hm2 Smart-serial boards can have HAL pins identified by board serial numbers * docs: update G33.1 example to include S100 M3 * docs: document motion.feed-inhibit better * docs: better usage info & manpage for moveoff_gui * docs: G64 now optionally takes Q * docs: add info on index-enable and home * docs: add info and links on embedding tabs * docs: fix bugs in encoder.9 manpage * docs: improve documentation of timers in hostmot2 manpage * docs: include the manpage pdf in linuxcnc-doc-en.deb * docs: improve G92.1 and G92.2 descriptions * axis: Fix regression of control disabling, bug #423 * touchy: fix Set Tool/Origin defaults on lathes * gmoccapy: several new keyboard shortcuts * gmoccapy: new place for full size preview button * gmoccapy: bug in fullsize / edit change * gmoccapy: add Hungarian translation * gladeVCP: Add new HAL_LightButton widget * gremlin: Add another mouse mode 6: l-move, m-zoom, r-zoom * halscope: report shm key when rtapi_shmem_new() fails * halui: better error reporting * UIs: better tolerance for task latency * halcmd now supports 32 tokens per line (up from 20) * xhc-hb04: fix a memory leak * Calibration dialog: fix finding of halfiles with tunable variables * moveoff: add gladevcp demo * streamer: add clock and clock-mode pins * add a driver for the Huanyang VFD * vismach: work around a bug in mesa * add a carousel toolchanger component and a vismach sample config * stepconf: add support for importing Mach3(tm) config files * stepconf: fix invert of signals on pp2 during axis test * stepconf: fix multiple picked outputs in axis test being ignored * pncconf: fix sserial combobox not selectable * hm2 ethernet: improved startup behavior * hm2 ethernet: support multiple fpga ethernet boards * hm2 ethernet: make unrecognized boards work * hm2 ethernet: do iptables and sysctl configuration automatically * hm2: don't overload queue_write's length argument (internal cleanup) * hm2: support split reads * hm2: avoid losing negative velocity commands on arm * hm2: enable encoder dpll (when supported by firmware) * add elpbcom, a program to communicate directly with mesa ethernet cards * add missing memory barriers for ARM * uspace: ensure that the thread-specific key is initialized * uspace: must advise user to set RTAPI_FIFO_PATH * uspace: fix uninitialized bytes in syscall sigaction * halcompile: fix parsing of >> and << * task: fix a bug in sequence number tracking * task: warn when dropping queued mdi commands * interp: log messages to stderr as intended, instead of crashing * canon: fix constraint violations with rotated g18/g19 arcs (bug #430) * io: initialize the tool-in-spindle info correctly * trajectory planner: pausing during G95 fix * trajectory planner: fix some bugs and constraint violations -- Sebastian Kuzminsky Thu, 13 Aug 2015 08:52:48 -0600 linuxcnc (1:2.7.0~pre6) wheezy; urgency=low * remove a useless warning message at linuxcnc startup * axis: Use a preferred form of "switch" (closes: SF#411) * gscreen: check the user directory for GTK2 themes * gscreen: added rapid override * gmoccapy: fix a bug in ignore limits * gmoccapy: include user dir in search for themes * xhc-hb04: support lower accels for mpg jogging * xhc-hb04: add pin for in or mm icon * xhc-hb04: err_exit for missing inifile stanzas * xhc-hb04 sim configs: typo fix * gladevcp: -H will now load hal tcl files as well as plain hal files * gladevcp: add HALIO_Button widget * stepconf: fix check for spindle encoder signals for pp2 * stepconf: fix check for spindle signals for pp2 * tooledit: fix a typo * hal-histogram: minor display improvements * latencybins.comp: fix ref to using script name * docs: fix latency-histogram.png image * docs: fix hal_pin_new() and hal_param_new() manpages * halcmd: clarify a getp error message * interp: verify that spindle is turning for G76 * tp: fix for pause during spindle synced motion regression from 2.6 * fix a type error with arcBlendGapCycles * hal: fix fatal memory corruption bug on linking pin to a signal -- Sebastian Kuzminsky Thu, 09 Apr 2015 20:22:33 -0600 linuxcnc (1:2.7.0~pre5) wheezy; urgency=low * gmoccapy: fixed division by zero error on spindle * gmoccapy: introduced frensh translation * gmoccapy: bug in btn_brake_macro * xhc-hb04 jog pendant: add man page, improve docs * xhc-hb04.tcl: bugfix, new connect, sig names * xhc-hb04.tcl: improve assign of coords to switch * moveoff: allow_backtracking_enable_change * moveoff: provide -no_display option * moveoff: honor changes in backtrack-enable * moveoff: verify non-connect of some pins * moveoff: improve demo sample configs * stepconf: fix missing parport reset commands * pncconf: add the 7i84 daughter card as an option * pncconf: add combobox filters to sserial and ss encoders * pncconf: have the sserial tabs display subboard names * pncconf: fix wrong auto-selection of last firmware * pncconf: add support for 7i76e * pncconf: add spindle vfd options * pncconf: improve spindle data collection * pncconf: fix calculation of STEPGEN_MAXVEL * latency-histogram: include min,max,stddev * hal-histogram: add a histogram utility for hal pins * halcmd: report error correctly when loadrt fails in uspace * halcompile: provide rtapi_math64.h * fix velocity & acceleration values on non-G17 arcs * fix rigid tapping/threading * possible fix for non-zero displayed velocity when stopped * motion: ensure that syncedIO is not disrupted * motion: catch non-fatal error during new segment and ensure that atspeed is not ignored * several internal fixes in the new trajectory planner * tp: fixed spindle atspeed overrun due to prev line consumption * tp: Improved handling of low-queue state * hal_procs_lib.tcl: no error if thread not found * hal_procs_lib.tcl: consolidate common procs -- Sebastian Kuzminsky Tue, 10 Mar 2015 08:46:32 -0600 linuxcnc (1:2.7.0~pre4) wheezy; urgency=low * axis gui: fix transition to world mode -- Sebastian Kuzminsky Sat, 21 Feb 2015 10:11:11 -0700 linuxcnc (1:2.7.0~pre3) wheezy; urgency=low * parport: remove probe_parport, it's no longer needed * add moveoff, a simple jog-while-paused implementation * axis gui: fix too-fast UVW jogs on inch machines displaying mm * axis gui: fix too-slow shift-jog speed on inch machines displaying mm * axis gui: let the user confirm before closing the window * axis gui: fix jog speed in Free mode * gmoccapy: fixed a serious bug with PAUSE / RESUME / STOP * gmoccapy: initialize mouse button mode corrected * gmoccapy: PAUSE button did not get active on M01 * gmoccapy: virtual keyboard "bug" not initialized settings correct * gmoccapy: report gcode errors * gmoccapy: better docs * gmoccapy: add polish translation * gmoccapy: turtle jog and analog in for slider values * gmoccapy: added support to select number of digits * gmoccapy: deleted unneeded stuff and new translation * gmoccapy: new hal pin and some renaming * gmoccapy: solved a bug in counts handling * gmoccapy: bug/limit in tool sensor height * gmoccapy: bug because I missed two self. * gmoccapy: added a clock and date label * gmoccapy: bug in hal pin updating, new spindle handling * gmoccapy: bug in initializing lathe mode * pncconf: fix icon/image path error * pncconf: lower default watchdog timeout * pncconf: fix double POSITION_OFFSET/FEEDBACK INI entry * pncconf: fix a kernal/kernel misspelling * stepconf & pncconf: remove probe_parport command * stepconf: use linux parport enumeration number as default * stepconf: remove a debug print * stepconf: fix a typo in a variable name * stepconf: fix the check_for_rt() function for uspace * stepconf: optionally generate configs with simulated hardware * xhc-hb04.tcl: support fractional scale factors * xhc-hb04.tcl: it's an error if halui is not running * xhc-hb04.tcl: simplify pin_exists proc * xhc-hb04: fix a memory leak * lincurve: better manpage * gs2_vfd: add missing -A, -D, and -R command-line args * gs2_vfd: accept -g to turn on debug output * sim_pin: use Toggle by default instead of Pulse * debounce: add an example of creating filter groups to manpage * encoder: document the surprising encoder num_chan=0 behavior in manpage * gladevcp: jogwheel improvements * gladevcp: fix a bug foreground color of combi_dro * gladevcp: add hiny versions of the hal_bar and led widgets * pyvcp: fix a bug in radio button widget * latency-test: fix a bug in command-line argument time parsing * latency-histogram: clean up on ^C * latency-histogram: show linuxcnc version * popupkeyboard.py: support standalone demonstration * linuxcnc, haltcl: pass args to haltcl file * twopass.tcl: handle haltcl files with args * util_lib.tcl utilities for haltcl halfiles * hal_gremlin: Emit signal in case of gcode error * linuxcnc: defer starting [APPLICATIONS]APPs * halui: don't forget the Task mode when queueing MDI commands * increase default arc radius tolerance (accept larger errors) * make arc radius tolerance an ini setting * hal: change function .time from parameter to pin * hal: increase shared memory size limits * halcmd: manage prompt better * hallib: support for system-wide halfiles * hallib: add sim_lib & basic_sim * hallib: relocate common halfiles to lib/hallib * hallib: add halcheck, a library halfile to check common errors * haltcl: allow haltcl twopass files to use non-builtin Tk widgets * inihal: bugfix for ini.n.backlash * inihal: document ini hal pins * sample configs: use as HALFILE not POSTGUI_HALFILE in Smithy configs * gm6: Add USPACE support * gm6: Fix RS485 DAC problem, when DAC has zero V output. * hm2: fix second default address of EPP port in 7i43 and 7i90 drivers * hm2 eth: use defines for all timeouts in driver * hm2 eth: cleanup unused code and leftover from rtnet * hm2 sserial: fix driver not reporting all sserial remote faults * hm2 sserial: fix reporting sserial remote faults * hm2 sserial: Fix .scalemax parameter was ignored on analog inputs * hm2 sserial: warning when remote sserial device has firmware version lower than r14. * hm2 sserial: report link failure * task: fix a bug that could drop mdi commands * task: fix a dead store * motion: rebrand a realtime warning message * motion: ignore feed-override when jogging * motion: reduce the scope of a state variable * motion: redo arc spiral handling * motion: several trajectory planner fixes * genhexkins: add hal pins for joints coordinates * hexapod-sim: support hal pins for joints coordinates * rtapi: fix release region * uspace: remove debugging message in parport driver * uspace: don't try to use rt hardening except on a realtime kernel * ini file variables can now span multiple lines using backslash * docs: lots of updates to the Getting Started document * docs: tidy up the top-level README a bit * docs: describe hal_manualtoolchange.change_button * docs: describe our git workflow briefly * docs: describe our Signed-Off-By procedure * docs: update Polish translation of software strings * docs: better G2/G3 description * docs: better G43 description * docs: update stepconf docs and images * docs: document io's lube pin a bit more * docs: include all manpages in the html & pdf docs * docs: fix inaccuracies in hal_init manpage * docs: describe postgui_halfiles with twopass info * docs: improve docs of hal tools * docs: improve docs of latency test tools * docs: move parallel port address docs to the correct place * docs: misc clarifications & minor improvements * docs: fixup manpage syntax for rtapi_app_main.3 & rtapi_app_exit.3 * docs: improve Servo-To-Go docs * halcompile: fix & document 'option extra_link_args' * halcompile: don't overrun the names[] array * halcompile: improve 'option rtapi_app no' description * halcompile: fix indentation nitpick in generated C code * halcompile: reject empty names * halcompile: document "option userspace" a bit more * halcompile: misc docs improvements * use /usr/bin/python in all python scripts * nml: implement command queue with reliable reception * nml: convert arch-dependent types to fixed-width types * build: refactor how manpages are generated * build: install the new pncconf python modules * build: depend on inkscape * build: use correct dependencies on Debian Jessie * tests: minor improvements to hm2 test * tests: fix a spurious false failure in the tlo test * tests: reorganize the halui jogging test dir layout * tests: give halui a few seconds to switch the task mode back * tests: add a halui mdi test * tests: add an nml-over-tcp test * tests: simplify t0 test and increase task queue usage * tests: fix a race condition in the toolchanger/toolno-pocket-differ test * tests: longer timeout in halui jogging test * tests: test names= and counts= of halcompile-generated comps * tests: loadrt must handle failure from rtapi_app_main * tests: add a test of jogwheel jogging via Motion * tests: fix a spurious failure of the tlo test * tests: add arc radius tests -- Sebastian Kuzminsky Wed, 18 Feb 2015 20:14:41 -0700 linuxcnc (1:2.7.0~pre2) wheezy; urgency=low * Fixup release tag signing. -- Sebastian Kuzminsky Wed, 22 Oct 2014 08:16:57 -0600 linuxcnc (1:2.7.0~pre1) wheezy; urgency=low * Brand new trajectory planner! * Support for the RT-Preempt realtime kernel. * Other things! -- Sebastian Kuzminsky Tue, 21 Oct 2014 14:31:54 -0500 linuxcnc (1:2.6.13) unstable; urgency=medium * docs: clean up shuttlexpress manpage & asciidocs * docs: remove note about defunct weblate service * docs: fix link to the install ISO files * docs: improve contributing instructions * docs: change max AIOs in motion manpage from 16 to 64 * sample configs: improved comments in Pico configs * sample configs: update tool table format * sample configs: let manual-example trigger a gladevcp bug * axis gui: work around python-tk "True" bug * gmoccapy gui: fix bug in halui.spindle-override.increase * gmoccapy: fix bug in initialize optional stops * gmoccapy: fix bug caused due to rests of alarm page * gmoccapy: fix keyboard jogging bug * gmoccapy: small bug fix in hal jogging and fixed a typo * gmoccapy: deleted alarm entry and added new settings for combi_dro * tklinuxcnc gui: fix Help->About error (rebranding) * gremlin: lathe-mode preview moving bug fix * halui: correctly report "mode.is_joint" * halui: check for errors in a non-crazy way * gladevcp: fix hal_sourceview file creation mode * gladevcp: fix mdi error with tiny values * gladevcp: fix icon select bug in Iconview * stepgen component: handle up to 16 channels * wj200 driver: fix startup crash with later versions of libmodbus * lcd component: stop processing when page_num is too high * lcd component: missing call to hal_ready * add gantry.comp * include udev rule file for ShuttleXpress USB jog pendant * linuxcnc python module: add doc string for stat.settings * interp: after syncing settings from canon, update all copies * interp: Fix subs breaking when placed after main program * interp: don't drop remap level at prog exit * interp: Fix incorrect `_setup.sequence_number` after remaps * interp: consistently set feed rate to 0 on M2/M30 * interp: don't return potentially stacked data * canon: return correct feed rate in G95 mode * task: only turn off the spindle once, when entering Estop * task: fix startup regression regarding coordinate systems and more * task: don't call emcTaskPlanInit() redundantly * task: don't redundantly call emcAbortCleanup() in emcIoAbort() * task: fixup indentation * motion: when motion disables, mark all joints as "in position" * glcanon: fix "is_lathe() is a function" bug * linuxcncsrv: ioctl(FIONREAD) wants int*, not ulong* * interp list: log calls to clear() when debugging is enabled * rtapi (sim): flush stdout/stderr after rtapi_print() * hal: fix header file comments describing HAL thread & funct times * rip-environment: rebranding * platform-is-supported: detect os in a more portable way * motion-logger: handle SPINDLE_ON/SPINDLE_OFF better * tests: add an abort-vs-feed-rate test (skipped) * tests: add a motion-logger S-word test * tests: add Z axis to `interp/g10/g10-l1-l10` tests * tests: add a test of early exit from cutter comp (skipped) * tests: add a test for M30 and remapped command interaction * tests: add a test demonstrating a remap bug * tests: add a test validating the startup state of the Status buffer * tests: add a test of initial coord system and RS274NGC_STARTUP_CODE * tests: add a hard limit test * tests: fixup `nested-remaps-oword` test * tests: remove `g10-l1` test, identical to `g10-l1-10` * tests: longer timeout in halui mdi test * tests: add comments to motion-logger/basic 'expected' file * tests: fix cut/paste errors in rs274ngc-startup and startup-state * tests: rs274ngc-startup test: wait for Task to start up * tests: throw a valid exception on timeout in startup-state test * tests: interp test of subs after main program -- Sebastian Kuzminsky Fri, 04 Nov 2016 07:55:00 -0600 linuxcnc (1:2.6.12) unstable; urgency=low * docs: add more github info to Contributing to LinuxCNC * docs: improve G43.1 info * docs: acknowledge Debian and UBUNTU trademarks * docs: fix incorrect GladeVCP example syntax and typo * docs: fix manpage markup bug in rtapi_app_{main,exit}.3rtapi * docs: gladevcp - describe the new iconview signal "sensitive" * docs: restore line numbers in example G-code * docs: clarify some pins in the halui manpage * docs: fix M70-M73 links in French Gcode Quick Reference * docs: fix link to the giteveryday(1) manpage * docs: describe gmoccapy Show Aux Display feature * docs: document gmoccapy updates and deleted some pin * mini.tcl: remove duplicate geo mgmt of widget * keystick: fix signal handler a second time * gladevcp: iconview could create exception in some circumstances * gmoccapy: stay synchronized with iconview widget button states * gladevcp/offset_widget: fix rare error of non-existent var file * gscreen: fix industrial skin's A axis DRO readout * tooledit_widget.py: tool diameter sorting fix * halui: fix some jogging bugs * halui: fix a copy-paste error that could prevent homing * serport: fix pin-1-in-not * task: fix start-from-line and remap interaction * interp: it's nonsense to take a boost::cref(this) * emcmodule: fix argument parsing * rtapi/sim: better error reporting * rtapi: error messages are better than errno numbers * hal: don't segfault if rtapi_init() fails * realtime script: wait for rtapi_app to die when stopping realtime * halui/jogging test: change which joint is selected while jogging * tests: test homing in halui/jogging * tests: add a motion-logger test of a remap bug * packaging: use "set -e" to fail on error in the postinst script * buildbot: don't try to build on Jessie RTAI * build: verify links in the gcode Quick Reference (English & French) -- Sebastian Kuzminsky Sun, 10 Jan 2016 10:07:09 -0700 linuxcnc (1:2.6.11) UNRELEASED; urgency=low * docs: update code notes on M61 * hm2_7i90 manpage: clarify firmware management * hm2_7i90 manpage: remove incorrect EPP info * gmoccapy: bug in tool info handling with tool number being "-1" * interp: fix an old bug in canned cycle preliminary & in-between moves * io: "no tool" is spelled "0", not "-1" * io: fix HAL pins on "M61 Q0" * tests: add an interpreter test of G81 * tests: add spindle unloading to m61 test * add motion-logger, a debugging tool * motion: motion_debug.h needs to include motion.h -- Sebastian Kuzminsky Sun, 01 Nov 2015 10:16:51 -0700 linuxcnc (1:2.6.10) wheezy; urgency=low * docs: specify that G92.1 and G92.2 only affect the G92 offsets * docs: update the GFDL blurb * docs: remove a stray ")" in User Intro * fix constraint violations with rotated G18/G19 arcs (SF bug #430) * touchy: G64 now takes optional Q * gmoccapy: fix single stepping through a program * pncconf: fix spindle control error * toggle2nist: does not require floating-point * motion: set the "In Position" status flag when aborting * task: fix a compile warning (heartbeat is unsigned long) * latency-plot: don't depend on a specific wish interpreter * sim_rtapi_app: clean up on failed "realtime" module load * build system: make the git scripts more user friendly * tests: add another loadrt test * packaging: switch to dh_python2 on Jessie and later * packaging: Debian Jessie and Ubuntu 14.04 don't have libgnomeprintui2.2 -- Sebastian Kuzminsky Fri, 02 Oct 2015 19:03:15 -0600 linuxcnc (1:2.6.9) wheezy; urgency=low * docs: update G33.1 example to include S100 M3 * docs: document motion.feed-inhibit better * docs: update encoder.9 manpage * docs: improve haltcl docs * docs: misc minor fixes & improvements * UIs: tolerate task latency better * touchy: Fix Set Tool/Origin defaults on lathes * gmoccapy: introduced hungarian translation * gmoccapy: several new keyboard shortcuts * gmoccapy: new place for full size preview button * gmoccapy: bug in fullsize / edit change * hal_glib: do not emit signal file changed on remap * vismach: work around a bug in mesa * hm2: Smart-serial boards can have HAL pins identified by board serial numbers * interp: don't set an invalid sequence number * interp: log messages to stderr as intended, instead of crashing * task: warn if the main loop takes too long * task: warn when dropping queued mdi commands * io: initialize the tool-in-spindle info correctly -- Sebastian Kuzminsky Sat, 08 Aug 2015 16:00:57 -0600 linuxcnc (1:2.6.8) precise; urgency=low * Axis GUI: Fix regression of control disabling, SF#423 * Axis GUI: Use a preferred form of "switch" (closes: SF#411) * gmoccapy GUI: bug in ignore limits solved * gmoccapy GUI: search also in the users dir for themes * gmoccapy GUI: fixed division by zero error on spindle * gmoccapy GUI: introduced french translation * gmoccapy GUI: bug in btn_brake_macro * tooledit: fix a typo/bug in a switch statement * stepconf: fix check for spindle encoder signals for pp2 * stepconf: fix check for spindle signals for pp2 * xhc-hb04 sim configs: typo fix * emccalib.tcl: allow whitespace on detected setp lines * halcmd: err msg applies pins or params * hal: fix fatal memory corruption bug on linking pin to a signal * hal: fix a dubious type cast * docs: fix hal_pin_new() and hal_param_new() manpages * packaging: depend on a GPLv2 version of readline * build system: clean up cache files -- Sebastian Kuzminsky Sun, 10 May 2015 13:37:22 -0600 linuxcnc (1:2.6.7) precise; urgency=low * axis gui: fix transition to world mode -- Sebastian Kuzminsky Sat, 21 Feb 2015 10:04:33 -0700 linuxcnc (1:2.6.6) precise; urgency=low * axis gui: fix jog speed on nontrivkins machines * gmoccapy: bug in initializing lathe mode * gmoccapy: bug because I missed two self. * gmoccapy: added a clock and date label * gmoccapy: bug in hal pin updating, new spindle handling * gmoccapy: bug/limit in tool sensor height * gmoccapy: solved a bug in counts handling * gmoccapy: new hal pin and some renaming * gmoccapy: deleted unneeded stuff and new translation * gmoccapy: added support to select number of digits * gmoccapy: turtle jog and analog in for slider values * gmoccapy: introduced polish translation * gmoccapy: report about gcode errors * pncconf: lower default watchdog limit * pncconf: fix double POSITION_OFFSET/FEEDBACK INI entry * halui: don't forget the Task mode when queueing MDI commands * debounce: document filter groups better in the manpage * pyvcp: Bug in radio button widgets * gladevcp: bug in combi_dro foreground color attribute * hal_gremlin - Emit signal in case of gcode error * inihal: bugfix, typo for ini.n.backlash * xhc-hb04: Fix memory leak * xhc-hb04: error exit if [HAL]HALUI not set * gm6: Fix RS485 DAC problem, when DAC has zero V output * better error message when a component fails to load in sim * comp: don't overrun the names[] array * comp: fix indentation nitpick in generated C code * docs: include a warning about power supplies for the STG * docs: update gmoccapy docs * docs: improve 'option rtapi_app no' description of comp * docs: fixup manpage syntax for rtapi_app_main.3 & rtapi_app_exit.3 * docs: fix inaccuracies in hal_init manpage * docs: document the surprising encoder num_chan=0 behavior * docs: update the md5sum of the Live/Install Image * docs: misc minor improvements * tests: fix a spurious failure of the tlo test * tests: test names= and counts= args of comp-generated components * tests: longer timeout in halui jogging test * tests: fix a race condition in the toolchanger/toolno-pocket-differ test * tests: simplify t0 test and increase task queue usage * tests: loadrt must handle failure from rtapi_app_main * packaging: use correct dependencies on Debian Jessie * packaging: tclx is a runtime dependency, not a build-dep -- Sebastian Kuzminsky Wed, 18 Feb 2015 21:15:08 -0700 linuxcnc (1:2.6.5) precise; urgency=low * gmoccapy: virtual keyboard "bug" not initialized settings correct * gmoccapy: initialize mouse button mode corrected * gmoccapy: PAUSE button did not get active on M01 * hostmot2: fix default address of the second EPP port (7i43 and 7i90) * gs2_vfd: add missing short command line arguments -g, -A, -D, and -R * lincurve: improve manpage * docs: correct G43 description * docs: improve G2 examples * docs: fix up whitespace in mux_generic(9) manpage * docs: document comp extra_link_args * docs: document Signed-off-By procedure * docs: include many missing manpages in the html index * comp: test that option extra_link_args works * comp: 'option extra_link_args' needs a string * latency-histogram: clean up on ^C * task: remove some dead code * task: fix a dropped-mdi bug * rebrand a realtime warning message from motion * tests: reorganize the halui test dir layout * tests: add a halui mdi test * tests: fix a spurious false failure in the tlo test * NML: improved debugging in interp_list -- Sebastian Kuzminsky Mon, 08 Dec 2014 22:38:23 -0700 linuxcnc (1:2.6.4) precise; urgency=low * axis gui: fix shift-jog speed being too slow on inch configs displaying mm * axis gui: fix UVW jogs being too fast by 25.4x, on inch configs displaying mm * gmoccapy gui: fixed serious bug with PAUSE / RESUME / STOP * gmoccapy gui: bug fixes, minor layout changes * gmoccapy gui: support now also matchbox-keyboard * hal: make 'halcmd save comp' order match original 'loadrt' order * gladevcp tooledit widget: flush tool file to disk * gladevcp tooledit widget: fix bugs with tool comment field * gladevcp led widget: fix blinking in GLADE editor problem * xhc-hb04: improve README * emccalib: fix a bug in hal file parsing * emccalib: enable search in POSTGUI_HALFILEs * popupkeyboard: support standalone demonstration * hm2: fix long-standing encoder velocity estimation error * hm2: fix FPGA names for 5i24, 5i25, and 6i25 * sim_pin: remove special case (-0) in isnegative * latency-test: fix a bug in "implied microseconds" mode * docs: update download & install information * docs: fix a copy/paste error in the hostmot2.9 manpage * docs: give units of ini vars in homing docs * docs: update stepper quickstart equation * docs: remove description of removed 'blocks' component * docs: update halshow description to remove outdated blocks component * docs: change stepconf values so they cover most common drives * docs: document some missing declarations in the comp tool * docs: in comp, variables should be of type float, not double * docs: update README build instructions to include autogen * docs: add gmoccapy documentation * docs: document milltask's "ini.*" hal pins * docs: fix some pyvcp examples * docs: fix a typo in the System Requirements document * docs: fix a markup bug in the Developer Manual * docs: fix motion-type description in motion manpage * docs: add info about remapped code reading hal pins * docs: fix some spellos in remap docs * docs: describe our git workflow briefly * tests: fix a transient failure in the halui-jogging test -- Sebastian Kuzminsky Sat, 01 Nov 2014 11:26:33 -0600 linuxcnc (1:2.6.3) precise; urgency=low * axis GUI: add ability to set default spindle speed * gmoccapy GUI: iteration over None object message * gmoccapy GUI: hal user message system introduced * gmoccapy GUI: corrected message system * xhc-hb04 jog pendant: move udev rule to the right place * python: fix exception in MultiFileBuilder.set_translation_domain * emccalib: fix bug #389 (not writing file) * estop-latch: improve documentation; set default pin values * hm2_7i90: remove some dead code * hm2 sample configs: set HOME_SEQUENCE * hm2 sample configs: let hm2-stepper estop when hm2 watchdog bites (Closes: #391) * docs: better description of 5420-5428 * docs: the remap inifile var is PYTHON_APPEND * docs: all html links work now * docs: section ids are externally accessible hyperlinks * french doc update: default spindle speed * french doc update: clarify comp's usage of count and names * french doc update: fix startup code example * packaging: recommend the correct hostmot2 package * packaging: Debian testing (Jessie) requires tcl/tk 8.6 * build system: misc minor portability fixes * tests: no need to track var file -- Sebastian Kuzminsky Fri, 05 Sep 2014 18:53:11 -0600 linuxcnc (1:2.6.2) precise; urgency=low * xhc-hb04: fix device file permissions * pncconf: fix error with firmware with more than 5 sserial channels * docs: update french translation * docs: fix startup code example * docs: misc minor fixes * sample configs: fix sim/axis/gantry backplot display -- Sebastian Kuzminsky Sat, 09 Aug 2014 09:19:48 -0600 linuxcnc (1:2.6.1) precise; urgency=low * Fix stepconf - generating new configs now works on Debian Wheezy and Ubuntu Precise. * Touchy: Disable macro button if there aren't any macros defined * Fix sim/axis/axis.ini sample config so the splash screen runs without re-zeroing G54. * minor docs improvements -- Sebastian Kuzminsky Mon, 04 Aug 2014 21:41:55 -0600 linuxcnc (1:2.6.0) precise; urgency=low * add missing copyright and GPL license on all files * fix many file & directory permissions * fix firmware paths in hm2 5i22 sample configs * fix incorrect values on iocontrol.0.tool-prep-pocket (io and iov2) * note gmoccapy runtime dependency on python-gst0 * axis: get interpreter address the right way -- Sebastian Kuzminsky Mon, 28 Jul 2014 19:21:10 -0600 linuxcnc (1:2.6.0~pre5) precise; urgency=low * Add G43.2 - this lets G-code sum an arbitrary number of tool length offsets by calling G43.2 multiple times. * add a demo config showing remapped G43.2 * touchy: add support for G43.2 * gmoccapy: screen2 bug fix * gmoccapy: new hal pins for program progress * gmoccapy: solved bug using change remap and tool edit widget * gmoccapy: fix a bug with remapped tool change * pncconf: fix an incompatibility between Mesa and LinuxCNC XMLs * pid: change pins from IO to IN * thcud: fix velocity tolerance calculation * debounce: improve manpage * parport: fix API manpage cut & paste errors * docs: G43.1 works with all axes, not just XZ * docs: French translation updates * docs: misc minor cleanups * docs: HAL floats are 64 bits wide now, not 32 * sim: fix 32-bit truncation of rdtsc on x86_64 * interp: print correct filename in message * interp: need to initialize context_struct * task: silence a warning with gcc 4.8 + boost 1.55.0 * task: don't link with ULAPISRCS * task: safer message formatting * rtapi: use proper type for rtapi_print_msg level * rtapi: Remove unused define * build-depend on libtk-img and make missing img::png a build-time failure * build: Fix a crash on gcc4.7.2 (Debian Wheezy) * build: fix inconsistency when multiple versions of tcl/tk are available -- Sebastian Kuzminsky Mon, 21 Jul 2014 09:52:26 -0600 linuxcnc (1:2.6.0~pre4) precise; urgency=low * fix several bugs with NURBS handling (G5, G5.1, G5.2) * add a Rapid Override control (analogous to Feed Override) * support moving 3, 6, or all 9 axes for a tool change * add a driver for the WJ200 VFD * add a driver for the Mesa 7i90 AnyIO board * general mechatronics: fix a NULL pointer bug * touchy: accept all axes for G43.1 TLOs * gmoccapy: fix a couple of bugs * comp: reject invalid .comp files that don't match the component name * docs: add docs for G5, G5.1, G5.2 NURBS G-codes * docs: clarify naming requirements of .comp files * docs: update classic ladder manpage * docs: add info on the servo axis calibration assistant in Axis GUI * docs: misc minor fixes * fix a "crawling scrollbar" cosmetic bug in linuxcnctop * fix handling of shell metacharacters in .ini filenames * fix auto-closing of directories in config picker -- Sebastian Kuzminsky Wed, 11 Jun 2014 21:39:31 -0600 linuxcnc (1:2.6.0~pre3) precise; urgency=low * HAL: make halcmd arrow syntax ('=>', '<=', '<=>') more strict (matches manpage now) * HAL: fix halcmd 'pin = value' and 'param = value' (matches manpage now) * HAL: don't clobber pin value when connecting to a net * HAL: fix a cosmetic bug in signal memory allocation * motion: add a pin giving the motion type (motion.motion_type) * pid: default to using previous target to compute error. This will disturb existing tunings, so those with old configs who do not want to re-tune may want to set pid.N.error-previous-target to false. * hm2: fix a bug in 5i24 support on some motherboards * hm2: fix 5i24 connector names * hm2: expose encoder inputs (A, B, Index) as HAL pins * fix a bug in the comp(1) tool that would let invalid .comp files compile, but crash when the invalid code executed * fix a crash in the biquad component (and add a test) * fix a crash in the mesa 7i65 driver * pickconfig: always allow creation of shortcuts (fixes bug #372) * gmoccapy: add option to hide 4th axis * gmoccapy: fix problem of pin_value changing on startup * gmoccapy: let user change the DRO font size * gmoccapy: reset error pin when user clears the message in GUI * gladevcp: fix a bug in iconview * sample configs: fix a bug in the gmoccapy config * sample configs: make xhc-hb04 program-run button automatically switch to auto mode * docs: update French translation * docs: update motion(9) manpage to match reality * docs: fix a markup error in hostmot2(9) manpage * docs: fix hostmot2(9) manpage encoder .rawcounts pin name * docs: update hm2_pci(9) manpage list of supported boards * docs: fix some bugs in the comp(1) documentation -- Sebastian Kuzminsky Sun, 25 May 2014 08:52:14 -0600 linuxcnc (1:2.6.0~pre2) precise; urgency=low * pncconf: fix bug with 7i43 address handling * pncconf: fix off-by-one error on pin numbering of 5i25 boards * General mechatronics driver: fix initialization for certain BIOSes * General Mechatronics driver: Improve DAC from 8 bit to 14 bit resolution * Axis: Fix mist and flood buttons (sf bug #371) * Axis: Fix spindle control buttons * gmoccapy: fix G92 as system bug * GUIs: better error message when tryint to tune un-tuneable ini file * gladevcp: fix a bug in the offsetpage widget * gladevcp: screen 2 "bug" solved and gcode.lang is back * halsh: initialize stubs library (this fixes builds on Ubuntu 14.04 Trusty) * edge component: Fix a couple of minor bugs * Add sample configs for Pico Systems PPMC with velocity estimation * docs: add descriptions of the new spindle speed pins in motion * docs: add descriptions of the new feed- and spindle-inhibit pins * daisy.ngc: Moves are way too short to make tones, if in mm mode -- Sebastian Kuzminsky Sun, 27 Apr 2014 16:25:56 -0600 linuxcnc (1:2.6.0~pre1) precise; urgency=low * reorganized sample configs to improve clarity * .ini files now support a '#INCLUDE' directive * pncconf: bug fixes and improvements * docs: lots of updates & improvements * docs: removed untranslated placeholders, german & polish * docs: updated italian translations (of the programs) * GUI: Axis: allow feed rate override display to go up to 9999% * GUI: Axis: XYUV foam cutter support * GUI: touchy: wheel scrolling of program start point * GUI: add new gmoccapy gui * GUI: add new gscreen gui * gladevcp: add new widgets: calculator, tool editor, source view, dro, offset display, jogwheel, pyngcgui, etc * HAL: haltcl now accepts -i or -ini * HAL: halcmd now supports tilde expansion * HAL: halscope now shows the first derivative of probe channels * HAL: hal_glib got a number of new signals * HAL: stepgen now supports 16 channels (up from 8 in 2.5) * HAL: gs2 VFD driver now supports configurable acceleration and deceleration, and has support for a braking resistor * HAL: halui now switches to manual mode automatically when the user requests jogging * HAL: new drivers: * VFS11 VFD * Delta VFD-B * General Mechatronics 6 axis motion control card * xhc-hb04 USB jog pendant * HAL: new components: * mux_generic: generic multiplexer, any number of pins, any data type * lincurve: linearization curve lookup table * matrix_kb: matrix keyboard driver * mb2hal: generic Modbus-to-HAL interface * orient: works with M19 to control spindle position * sim-encoder: simulate an encoder, for useful for testing * thcud: torch height control for plasma * Hostmot2: add support for 5i24 AnyIO board * Hostmot2: add support for buffered SPI * Hostmot2: add support for the Mesa 7i65 (bspi 8xServo) * Hostmot2: add support for uarts * Hostmot2: add support for serial encoders (ssi, biss, and fanuc) * Hostmot2: add support for table-mode stepgens * Hostmot2: add support for DPLL * Hostmot2: detect & report encoder quadrature error * Hostmot2: improved support for encoders (configurable filter rate) * Hostmot2: improved support for muxed encoders (configurable skew rate) * Hostmot2: changed handling of 8i20 and 7i64 (.hal file changes needed!) * interp: G-codes can now be remapped * interp: added read-only named parameters (#<_x> etc) * interp: added M19 (orient spindle) and an orient component * interp: added saving and restoring of modal G-code state with M70-M73 * interp: bug fixes in O-word handling * interp: add python subroutines * motion: coolant and lube are now user-controllable at all times * motion: add spindle speed inihibit and feed inhibit input pins * motion: add spindle absolute speed output pins * motion: rapid velocity now ignores feed override setting * rtapi: misc bug fixes * removed usrmot (buggy & unused) * removed freqgen component, it's been replaced by stepgen's velocity mode * build: simplified our usage of libmodbus -- Sebastian Kuzminsky Wed, 16 Apr 2014 21:12:39 -0600 linuxcnc (1:2.5.5) lucid; urgency=low * AXIS: fix UVW jogs being too fast on inch configs displaying mm * AXIS: fix shift-jog being too slow on inch configs displaying mm * Docs: many fixes and updates * HAL: biquad: fix crash when first enabled * HAL: comp: fail to build some kinds of buggy comp code, instead of successfully compiling and then crashing at runtime. * HAL: comp: reject comp files whose names don't match the component name * HAL: edge: fix out-invert pin on first invocation * HAL: edge: fix output pulse width * HAL: halsh: fix for tcl8.6 in (x)ubuntu 14.04 * HAL: serport: fix pin-1-in-not not being notted * HAL: stepgen: support 16 stepgens instead of 8 * HAL: fix pin values changing when linking/unlinking them * Linuxcnctop: fix crawling scrollbar * Motion: fix canned cycles when old Z is below retract plane * NURBS: reject incorrect NURBS specifications instead of accepting them and then generating incorrect motion * NURBS: fix path calculation and discontinuous motion * Pncconf: fix some GPIO pins not showing * Pncconf: sserial fixes -- Chris Radek Wed, 11 May 2016 19:46:47 -0500 linuxcnc (1:2.5.4) lucid; urgency=low * Build: update dependencies for Debian 7 * Docs: many fixes and updates * HAL: blend: fix docs to match the real behavior * HAL: edge: fix incorrect edge trigger at startup: Bug #346 * HAL: ilowpass: handle encoder counter overflows properly * HAL: lcd: fix formatting when no format length is specified * HAL: new components bin2gray, gray2bin for Gray code conversion * HAL: new components bitwise and bitslice, for bitwise math operations * HAL: pcl720: fix in-not pins * HAL: thc: fix incorrect calculation of velocity tolerance: Bug #348 * Hostmot2: document ability to have multiple 7i43 cards * Hostmot2: fix for PCI transfers on Linux 3.x kernels * Hostmot2: fix resolver index emulation/detection * Hostmot2: fix resolver total brokenness on 64-bit builds * Interpreter: fix crash when returning from a subroutine, to a file that has been deleted: Bug #357 * Interpreter: fix VW-plane (G19.1) canned cycles * NGCGUI: Always apply tool offset when loading a tool * NGCGUI: Fix qpocket stepover, ramping for mm users * NML: fix remote clients talking to linuxcncserver * Pncconf: allow setting the number of classicladder bits and words * Pncconf: fix configurations requesting gladevcp panels without spindle speed displays * Pncconf: fix 7i43 address designation: Bug #358 * Pncconf: fix 5i25+prob_rfx2 pin numbering problem: Bug #331 * Pncconf: fix testing of smart-serial based spindles * Pncconf: place STEPGEN_MAXVEL/STEPGEN_MAXACCEL values in the ini * PPMC: Add new sample config showing encoder velocity estimation * PyVCP: in a spinbox, allow entering a value with Return: Bug #364 * Stepconf: better defaults for axis-test distances * Stepconf: fix spindle-at-speed connection * Task: fix several problems with M61 (set currently-loaded tool) * Touchy: MDI support for M61 Q * Touchy: MDI support for multi-turn arcs * TP: fix a minor acceleration constraint violation in some arcs -- Chris Radek Thu, 17 Apr 2014 11:49:12 -0500 linuxcnc (1:2.5.3) lucid; urgency=low * AXIS: fix disable/enable of the toolbar's reload button * BUILD: fix linking on 32 bit x86 debian 7.1 * Configs: use names= everywhere to make the sim configs clearer * Docs: Many improvements * HAL: clarkeinv: allow rotation of the input vector * HAL: sim_pin: add support for u32, s32, float types * HAL: abs_s32: don't unnecessarily require floating point * HAL: comp: fix option userinit * HAL: comp: improve handling of build failures and error reporting * HAL: twopass: improve error reporting * Hostmot2: fix smart serial port shutdown * Interpreter: Fix bug 315 part 2, O-call through named parameter * Kins: replace 5axiskins.c, used by a sample config * Kins: 5axiskins: remove misleading tool-length pin * Motion: allow for floating point in the base thread * PPMC: add encoder timestamp velocity estimation * PPMC: selectable encoder filter clock * PyVCP: fix several behaviors in the dial widget * Task: fix MDI-queueing problems * USC: new sample config for Pico USC with encoders * linuxcncrsh: many stability fixes * pncconf: fix 5i25 GPIO numbering * pncconf: fix default PDM rate * pncconf: fix open loop test * pncconf: fix incorrect zh_CN translation which broke millimeter mode -- Chris Radek Tue, 23 Jul 2013 12:34:46 -0500 linuxcnc (1:2.5.2) lucid; urgency=low * AXIS: Allow the setting of the top end of the Max Velocity slider according to [DISPLAY]MAX_LINEAR_VELOCITY as the docs say * Components: Fix mux16's debounce function * Components: LCD character display driver * Components: New multiclick component detects single, double, triple clicks * Docs: Many improvements * Gremlin: Better error reporting for gcode errors * Gremlin: Fix rotated axes display * Halui: Include tool length offsets in relative position outputs * Hostmot2: Fixes to sserial * Kins: Fix teleop jogging of ABC axes in the negative direction * Modbus: Fix TCP communication time out error * New config: Gecko G540 * New config: Smithy 1240combined_mm * PID: Optional new error-previous-target mode to reduce ferrors detected by motion. This is especially useful for torque-mode loops and those tunings that use large I gains * pncconf: Many fixes * PPMC: Better error checking for hardware problems causing miscommunication * Tool Table: Many fixes to tool table handling, making tool tables on nonrandom setups using mismatched tool and pocket numbers work correctly * Translations: German for tooledit * Translations: Many improvements to French * Utilities: new latencyhistogram program that shows details about latency * Utilities: sim_pin, a script that simulates writing to hal pins -- Chris Radek Sun, 03 Mar 2013 17:07:57 -0600 linuxcnc (1:2.5.1) lucid; urgency=low * Motion: fix incorrect spindle direction after G43 in CSS+M4 mode * Interpreter: allow G10 L1 to set front/back angles when not also changing offsets * Interpreter: correctly report G96/G97 mode to the UI * Interpreter: explicitly set the default spindle mode at startup * task: fix incorrect spindle speed display when switching mode (Manual/MDI) * PPMC: fix a bug that would cause missing encoder velocity pins on some versions * Hostmot2: Fix a couple of bugs affecting sserial (crash on shutdown, memory leak) * Hostmot2: Add support for 6i25 * AXIS: fix a surprise jog when the jog increment combobox was open * AXIS: show S word in active gcode pane * AXIS: rebranding * Touchy: rebranding, change program path to ~/linuxcnc/nc_files * Docs: improvements/clarifications to the halui.1 manpage * Docs: improvements/clarifications to the gladevcp docs * Docs: improvements/clarifications to the halcmd docs * Docs: improvements/clarifications to the gcode docs * Docs: fix misc typos, misspellings, grammar, and markup bugs * Docs: updates to French translations * GladeVCP: fix EMC_Action_Open * GladeVCP: new default-value example * tooledit: save/restore geometry, allow sorting on specific columns * tooledit: bugfixes and i18n * ngcgui: minor fixes and additions * pncconf: lots of bug fixes and incremental improvements * portability fix for Ubuntu Precise 12.04 LTS * portability fix for Fedora 16 * Calibration: fix missing entries in tuning/calibration screens * emcrsh: fix incorrect relative position report for some offset settings * time.comp: fix hours wrapping at 60 -- Chris Radek Sun, 29 Jul 2012 13:48:25 -0500 linuxcnc (1:2.5.0) lucid; urgency=low * AXIS: dynamic tabs can embed other applications, including virtual control panels * AXIS: make the gcode readout resizable * AXIS: many speedups in preview generation * AXIS: new OpenGL preview with antialiased fonts * AXIS: optional blending in the program preview can make very complex programs easier to see * AXIS: prompt when homing a joint that's already homed * AXIS: Selectable tool touch off to workpiece or fixture * AXIS: show all offsets and rotation separately in the BIG DRO * AXIS: show G5x and G92 offsets graphically in the preview * AXIS: user-configurable MDI history file * AXIS: A comment (AXIS,notify,message) will print "message" when the preview is generated, instead of just at run-time. * Configs: many configuration updates for Smithy machines * Configs: update motenc sample configs for encoder index * Configs: add filtering (image-to-gcode etc) to hostmot2 samples * Configs: univpwm sample uses new encoder velocity for pid * GladeVCP: a new framework for making virtual control panels with the Glade screen designer * Gremlin: AXIS's program preview is now separated out as gremlin, for use with GladeVCP/Touchy/etc. * HAL: fix rare problem with freqgen output getting stuck "on" * HAL: gearchange component: support up to 32 gears * HAL: make commanded (unaffected by spindle override) spindle speed available on a pin, for gear selection etc. * HAL: make limit3 parameters into pins * HAL: new axis.N.motor-offset pins can be used to detect position loss between homings * HAL: new component bldc_sine: commutation for BLDC with encoder feedback * HAL: new mux16 component * HAL: new time comp, which converts seconds to hr/min/sec * HAL: new watchdog component * HAL: remove deprecated hal_m5i20 driver * HAL: new component for ShuttleXpress USB jog dongle * HAL: support names= options for encoder_ratio, sim_encoder, at_pid, siggen * HAL: a new component, message, to display user messages from HAL * HAL: a new component, multiswitch, to toggle through bits with one button * Halshow: add menu with load/save/exit * Halshow: fix the tree to not cut off after a certain depth * HAL: standardize on maximum hal name length * HALUI: allow direct-value input to spindle and feed overrides and max velocity * HALUI: handle the situation better when many command inputs change simultaneously * Hostmot2: fix a rare problem in stepgen mode setting * Hostmot2: fix stepgen moving VERY slowly when it should have been stopped * Hostmot2: handle failed card registration better * Hostmot2: support for multiplexed encoders like on the 7i48 * Hostmot2: support for onboard diagnostic LEDs * Hostmot2: support for three phase PWM * Hostmot2: improve watchdog reliability and defaults * Interpreter: fixes to always use . for a decimal, no matter the locale * Interpreter: fix G83 peck retract to match fanuc * Interpreter: fix G98/G99 to match fanuc retract planes behavior * Interpreter: fix "run from line" when the start line is between a sub definition and its call * Interpreter: give correct errors when rotary axes are commanded to move in canned cycles * Interpreter: improve arc endpoint radius-mismatch error checking * Interpreter: maintain G5x and G92 offsets separately * Interpreter: make current position including all offsets and in the current program units available in parameters 5420-5428 * Interpreter: make EMC version available in named parameters _vminor, _vmajor * Interpreter: make G92 offset rotated coordinate systems correctly * Interpreter: make more errors translatable * Interpreter: many fixes to allow O-call of subroutines from MDI mode * Interpreter: many new tests in the test suite, including the ability to verify errors * Interpreter: new G10 L11 code for tool touch off to fixture instead of active work coordinate system * Interpreter: new unary function EXISTS tells whether a certain parameter exists * Interpreter: search path for subroutines: [RS274NGC]SUBROUTINE_PATH * Interpreter: search path for user M-codes: [RS274NGC]USER_M_PATH * Interpreter: detect and error on malformed O-if[] statements * IOcontrol: make aborting tool changes work * Kinematics: several improvements to the general serial kinematics module * Motenc, VTI, Opto_ac5: PCI-related update for new kernel versions * Motion: allow translations of more error messages * Motion: fix stuttering motion in NURBS * Motion: support for indexing/locking rotary axes * ngcgui: many new features and bugfixes * PID: accept external command-deriv and feedback-deriv connections to use a high quality velocity signal when it is available * pncconf: many new features and bugfixes * PPMC: improve error messages when cards are not found * Probing: correctly abort motion when the probe trips during a non-probe MDI command * Rebranding: rename EMC to LinuxCNC * TkEMC: display and allow entry of all tool offsets * TkEMC: in Set Coordinates, display the correct axes * TkEMC: only display active axes * TkEMC: show coordinate system in offset widget * TkEMC: show work offsets for all axes * Touchy: add a spindle speed readout on the manual tab * Touchy: dynamic tabs can embed other applications, including virtual control panels * Touchy: macro capability that uses MDI O-call * Touchy: make single-block switch work like feed hold * Touchy: save maximum velocity (MV) value across runs * Touchy: Selectable tool touch off to workpiece or fixture * Touchy: show all offsets separately in the status information * Touchy: show the total number of lines in the loaded program * Touchy: show which tools are in which pockets * Touchy: support for metric configurations * Touchy: support panel indicators for status readout * Touchy: use appropriate jog and maxvel increments for metric and degrees * Touchy: turning the wheel during a continuous jog changes the current jog speed * add a G-code language spec for gedit * add latencyplot, a strip-chart type display of latency test results -- Chris Radek Fri, 30 Mar 2012 13:20:02 -0500