Source: owfs Maintainer: Vincent Danjean Section: electronics Priority: optional Build-Depends: debhelper-compat (= 13), quilt, libfuse-dev [!hurd-i386], swig, tcl-dev, libusb-1.0-0-dev, ed, php-cli, php-dev, systemd [linux-any], groff-base, pkg-config, libavahi-client-dev, libftdi1-dev Standards-Version: 4.5.0 Vcs-Browser: https://salsa.debian.org/debian/owfs Vcs-Git: https://salsa.debian.org/debian/owfs.git Homepage: http://owfs.org/ Rules-Requires-Root: no Package: owfs-common Architecture: all Multi-Arch: foreign Depends: ${misc:Depends}, adduser, ucf Breaks: libow-2.8-15 (<<2.9) Description: common files used by any of the OWFS programs The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the common files that are used by any of the OWFS programs. Package: owfs Architecture: all Depends: ${misc:Depends}, owfs-fuse (>= ${binary:Version}), owserver (>= ${binary:Version}), owhttpd (>= ${binary:Version}), owftpd (>= ${binary:Version}) Suggests: owfs-doc Description: Dallas 1-wire support The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package is a metapackage depending on various other OWFS packages. Installing this package gets you a FUSE daemon, server arbitrates access to the bus from multiple client processes, small ftp and webserver. Package: libow-3.2-4 Architecture: any Multi-Arch: same Section: libs Depends: ${shlibs:Depends}, ${misc:Depends}, owfs-common (>= ${source:Version}) Pre-Depends: ${misc:Pre-Depends} Description: 1-Wire File System full library The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package includes the ow library that is able to talk directly to 1-wire buses. Package: libowcapi-3.2-4 Architecture: any Multi-Arch: same Section: libs Depends: ${shlibs:Depends}, ${misc:Depends} Pre-Depends: ${misc:Pre-Depends} Description: 1-Wire File System C library The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package includes the C API that allows one to talk directly to 1-wire buses (through the libow library). Package: libow-dev Architecture: any Section: libdevel Depends: ${shlibs:Depends}, ${misc:Depends}, libow-3.2-4 (= ${binary:Version}), libowcapi-3.2-4 (= ${binary:Version}) Description: 1-Wire File System (development files) The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package includes development libraries and C header files. Package: libownet-3.2-4 Architecture: any Multi-Arch: same Section: libs Depends: ${shlibs:Depends}, ${misc:Depends} Pre-Depends: ${misc:Pre-Depends} Description: owserver protocol library The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package includes the ownet library that is able to talk to a owserver in order to get/send 1-wire information. Package: libownet-dev Architecture: any Section: libdevel Depends: ${shlibs:Depends}, ${misc:Depends}, libownet-3.2-4 (= ${binary:Version}) Description: owserver protocol library (development files) The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains the development libraries and interfaces to access a remote owserver. Package: owserver Architecture: any Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends}, owfs-common (>= 3.2p3-1~), lsb-base Suggests: avahi-daemon Description: Backend server for 1-Wire control The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . OWserver arbitrates access to the 1-Wire bus from multiple client processes. The physical bus is usually connected to a serial or USB port, and other processes connect to owserver over network sockets (tcp port). Communication can be local or over a network. Package: ow-shell Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Suggests: owserver Description: shell utilities to talk to an 1-Wire owserver The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package has several command line programs to talk to an owserver. Included programs are : * owdir: list 1-wire devices or properties * owread: read 1-wire value * owget: combines owdir and owread * owwrite: set a 1-wire value * owexist: check if a 1-wire server is reachable * owpresent: check if a 1-wire device is connected Package: ow-tools Architecture: all Depends: ${misc:Depends}, tk Suggests: owserver Breaks: ow-shell (<< 2.9p5) Replaces: ow-shell (<< 2.9p5) Description: tools to monitor or inspect a ow-server link The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package includes two TclTk tools: * owtap: inspect network transmission of the owserver protocol * owmon: show statistics and setting for an owserver Package: owfs-fuse Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, owfs-common (>= 3.2p3-1~) Recommends: owserver, fuse Suggests: owhttpd, owftpd Description: 1-Wire filesystem The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . OWFS is a userspace virtual filesystem exposing all 1-Wire properties mapped into a filesystem. Package: owhttpd Architecture: any Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends}, owfs-common (>= 3.2p3-1~), lsb-base Recommends: owserver Description: HTTP daemon providing access to 1-Wire networks The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . HTTP daemon providing access to 1-Wire networks. Package: owftpd Architecture: any Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends}, owfs-common (>= 3.2p3-1~), lsb-base Recommends: owserver Description: FTP daemon providing access to 1-Wire networks The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . FTP daemon providing access to 1-Wire networks. Package: libow-php7 Architecture: any Section: php Depends: ${shlibs:Depends}, ${misc:Depends}, ${php:Depends} Breaks: libow-php5 (<< 3.2) Description: Dallas 1-wire support: PHP5 bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . PHP bindings for the OWFS 1-wire support library have been produced with SWIG and allow access to libow* functions from PHP code. Package: libownet-php Architecture: all Section: web Depends: php | php-cli, ${misc:Depends} Description: Dallas 1-wire support: PHP OWNet library The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . The PHP OWNet library lets you access owserver and allows reading, writing and listing the 1-wire bus. Package: libow-perl Architecture: any Section: perl Depends: ${shlibs:Depends}, ${perl:Depends}, ${misc:Depends} Description: Dallas 1-wire support: Perl5 bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . Perl bindings for the OWFS 1-wire support library have been produced with SWIG and allow access to libow functions from perl code. Package: libownet-perl Architecture: all Section: perl Depends: ${shlibs:Depends}, ${perl:Depends}, ${misc:Depends} Description: Perl module for accessing 1-wire networks The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . OWNet.pm is a perl module for accessing 1-wire sensors through an owserver. Package: libow-tcl Architecture: any Section: interpreters Depends: ${shlibs:Depends}, ${misc:Depends} Description: Dallas 1-wire support: Tcl bindings The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . This package contains Tcl bindings to the OWFS core library (libow), which is used to access 1-Wire networks Package: owfs-doc Architecture: all Section: doc Depends: ${misc:Depends} Suggests: owfs Description: Dallas 1-wire support: Documentation for owfs The 1-Wire bus is a cheap low-speed bus for devices like weather sensors, access control, etc. It can be attached to your system via serial, USB, I2C, and other interfaces. . Documentation for OWFS in 'man' format. This package contains the manpages for 1-Wire, including the device-specific manpages.