thermald (2.5.2-1) unstable; urgency=medium * sync to thermald 2.5.2 * Remove patches now that they are in the 2.5.2 release -- Colin Ian King Mon, 6 Feb 2023 11:21:31 +0000 thermald (2.5.1-3) unstable; urgency=medium * Pull in 2 upstream commits, minor dump improvement and a parse pid fix: - Added ReadBack and DebouncePeriod to dump upstream patch 0002-Added-ReadBack-and-DebouncePeriod-to-dump.patch - Parser PID Parameter initialize upstream patch 0003-Parser-PID-Parameter-initialize.patch -- Colin Ian King Fri, 13 Jan 2023 14:55:11 +0000 thermald (2.5.1-2) unstable; urgency=medium * Add Alderlake N in the supported CPU model list - upstream patch 0001-Add-AlderLake-N.patch * debian/control: update standards version to 4.6.1 -- Colin Ian King Tue, 13 Dec 2022 14:31:23 +0100 thermald (2.5.1-1) unstable; urgency=medium * sync to thermald 2.5.1 -- Colin Ian King Tue, 20 Sep 2022 23:38:23 +0100 thermald (2.5.0-1) unstable; urgency=medium * sync to thermald 2.5.0 -- Colin Ian King Wed, 20 Jul 2022 09:18:11 +0100 thermald (2.4.9-1) unstable; urgency=medium * sync to thermald 2.4.9 (Closes: #1006819) * Remove RedHat thermald fixes introduced in previous 2.4.7-2 release now that these are in 2.4.9 * This release contains fixes for Dell Tiger Lake And Alder Lake -- Colin Ian King Wed, 23 Mar 2022 09:31:22 +0000 thermald (2.4.7-2) unstable; urgency=medium * Pull in RedHat thermald fixes (Closes: #1005478) - Properly reading evdev devices - Splitting thd_engine_start into two; as otherwise we may print useless warnings (sensors are read too late for condition verification) - Using libevdev to read lid state rather than upower (the functionality is deprecated) (and FTBFS) - Improved cleanup code see: https://github.com/benzea/thermal_daemon/tree/ \ benzea/adaptive-improvements * Update maintainer email address -- Colin Ian King Wed, 23 Feb 2022 18:14:12 +0000 thermald (2.4.7-1) unstable; urgency=medium * sync with latest upstream release 2.4.7 -- Colin Ian King Tue, 11 Jan 2022 08:31:11 +0000 thermald (2.4.6-2) unstable; urgency=medium * Jasper Lake CPU support (LP: #1940629) - 0001-Added-Jasper-Lake-CPU-model.patch -- Colin King Fri, 20 Aug 2021 15:46:15 +0100 thermald (2.4.6-1) unstable; urgency=medium * sync with latest upstream release 2.4.6: - fix overheating Latitude 7400 (LP: #1930422) - Use Adaptive PPCC limits for RAPL MMIO - Increase power limit for disabled RAPL-MMIO - Special case for default PSVT * 2.4.5 fixes: - Set a very high RAPL MSR PL1 with --adaptive -- Colin King Wed, 9 Jun 2021 16:58:23 +0100 thermald (2.4.3-2) unstable; urgency=medium * Disable some older legacy patches to keep thermald close to upstream release, disable: - 0002-Don-t-keep-on-reading-a-sensor-if-the-temperature-is.patch - 0003-thermald-fix-uninitialised-member.patch - 0004-Remove-processing-when-trip-was-not-activates.patch -- Colin King Tue, 8 Mar 2021 22:37:12 +0000 thermald (2.4.3-1) unstable; urgency=medium * sync with latest upstream release 2.4.3 (LP: #1917608) * debian/rules remove "HERE" debug message -- Colin King Wed, 3 Mar 2021 10:42:47 +0000 thermald (2.4.2-1) unstable; urgency=medium * sync with latest upstream release 2.4.2 -- Colin King Fri, 5 Feb 2021 16:10:23 +0000 thermald (2.4.1-1) unstable; urgency=medium * sync with latest upstream release 2.4.1 - drop patches that are in 2.4.1 -- Colin King Thu, 10 Dec 2020 17:00:01 +0000 thermald (2.3-5) unstable; urgency=medium * Pull in latest upstream fixes: [Benjamin Berg] - 0009-adaptive-Improve-logging-of-high-order-Oem-condition.patch - 0010-adaptive-Move-merging-dumping-out-of-gddv-parsing.patch - 0011-adaptive-Properly-parse-data-vault-objects-recursive.patch - 0012-adaptive-Log-name-of-unknown-condition-if-known.patch - 0013-adaptive-Use-Oem0-constant-instead-of-19-which-is-le.patch - 0014-adaptive-Implement-dummy-power-slider-condition.patch - 0016-engine-Throw-different-errors-for-startup-issues.patch - 0017-Use-special-exit-code-of-2-for-unsupported-platforms.patch - 0018-data-Restart-systemd-service-on-failure.patch [Srinivas Pandruvada] - 0015-Added-Cometlake-and-Rocketlake-CPU-models.patch - 0019-Allow-base-path-change-for-INT3400.patch -- Colin King Wed, 28 Oct 2020 17:16:34 +0000 thermald (2.3-4) unstable; urgency=medium * Fix Homepage field in debian/control (Closes: #971246) - use https://01.org/linux-thermal-daemon -- Colin King Mon, 28 Sep 2020 09:55:23 +0100 thermald (2.3-3) unstable; urgency=medium * Add Cometlake and Rocketlake CPU models (LP: #1896419) [Srinivas Pandruvada] - 7f2003ee911d Added Cometlake and Rocketlake CPU models -- Colin King Mon, 21 Sep 2020 16:04:11 +0100 thermald (2.3-2) unstable; urgency=medium * Pull in latest upstream bug fixes to 2.3, patches 0005-0008* [Benjamin Berg] - 0710804c2c27 adaptive: Fix 64bit printing on non-64bit machines Fixes FTBFS on 32 bit systems - 8c283e472fa3 Fix path for Lenovo kill-switch heuristic The path was missing the /sys prefix, rendering the test useless. Add the appropriate prefix and also a comment explaining why we do this. [Srinivas Pandruvada] - d14d4b69a4e8 Replace thd_log_fatal with thd_log_warn Since --adaptive by default when parsing fails to revert to non adaptive. But thd_log_fatal will cause it to exit. Instead display warning and catch error and continue with non adaptive - 32dc5502245b Continue for PSVT version != 2 Error out only when version is > 2. -- Colin King Tue, 8 Sep 2020 09:55:27 +0100 thermald (2.3-1) unstable; urgency=medium * sync with latest upstream release 2.3 * Debain/control: Add more dependencies -- Colin King Fri, 21 Aug 2020 09:26:11 +0100 thermald (2.1-2) unstable; urgency=medium * Debian/control: Add Rules-Requires-Root: no * Debian/control: Reformat Build-Depends entries * Debian/control: remove quilt from Build-Depends -- Colin King Sat, 4 Jul 2020 21:59:37 +0100 thermald (2.1-1) unstable; urgency=medium * sync with latest upstream release 2.1 * Add autoconf-archive to Build-Depends * Add debhelper-compat (=12), remove debian/compat -- Colin King Tue, 12 May 2020 11:01:23 +0100 thermald (1.9.1-1ubuntu1) groovy; urgency=medium * Intel Tiger Lake support (LP: #1876066) -- Alex Tu Thu, 30 Apr 2020 18:16:16 +0800 thermald (1.9.1-1build1) focal; urgency=medium * No-change rebuild for libgcc-s1 package name change. -- Matthias Klose Sat, 21 Mar 2020 13:29:32 +0100 thermald (1.9.1-1) unstable; urgency=medium * sync with latest upstream release 1.9.1 * Add upstream fix: - baed10762219 Fix debug information for cdev -- Colin King Sun, 15 Dec 2019 22:18:11 +0000 thermald (1.9.0-1) unstable; urgency=medium * sync with latest upstream release 1.9 (LP: #1838590) * Add upstream fix: - dcdaf523393a Use correct format specifier for size_t * Update postinst, postrm, postpreinst rn_conffile package version * Update debian/compat to 12 -- Colin King Mon, 5 Aug 2019 09:12:15 +0100 thermald (1.8.0-1) unstable; urgency=medium * sync with latest upstream release 1.8 * remove some patches from previous release as they are all merged into 1.8 and refresh the others to apply cleanly. * Add upstream fixes: - 99e51f3bed99 fix cdev state error while trip point is off - bb7631163c8f Use correct format specifier for size_t * Update compat to 11 * Clean up package-uses-old-debhelper-compat-version warning -- Colin King Fri, 19 Oct 2018 11:04:47 +0100 thermald (1.7.0-8) unstable; urgency=medium [ Eric S. Raymond ] * manual: thermal-conf.xml.5: fix markup [ Colin King ] * manual: thermal-conf.xml.5: fix indentation of XML examples * debian/changelog: remove extraneous trailing white spaces -- Colin King Tue, 19 Jun 2018 09:26:11 +0100 thermald (1.7.0-7) unstable; urgency=medium [ Srinivas Pandruvada ] * Remove processing when trip was not activates - When trip was not activated, don't poll cooling device status. This will save some CPU cycles. [ Colin King ] * Remove extraneous line at end of debian/control -- Colin King Tue, 15 May 2018 10:15:15 +0100 thermald (1.7.0-6) unstable; urgency=medium [ Ben Caradoc-Davies ] * Fix non-initialized temp_unreadable (Closes: #896132) - fixes regression caused by previous fix, initialise temp_unreadable to restore temperature control. -- Colin King Fri, 20 Apr 2018 02:08:23 +0100 thermald (1.7.0-5) unstable; urgency=medium * Don't continually re-read broken temperature sysfs file (LP: #1764320) log once that is unreadble, thereafter don't re-read as this will spam the log with read failure messages -- Colin King Tue, 17 Apr 2018 16:22:21 +0100 thermald (1.7.0-4) unstable; urgency=medium * Fix global-files-wildcard-not-first-paragraph-in-dep5-copyright -- Colin King Tue, 6 Mar 2018 09:46:19 +0000 thermald (1.7.0-3) unstable; urgency=medium * remove /etc/init/thermald.conf (Closes: #884589) * clean up warning: thermald source: useless-autoreconf-build-depends dh-autoreconf * Update compat from 9 to 10 * Use debhelper >= 10 -- Colin King Sun, 17 Dec 2017 14:04:24 +0000 thermald (1.7.0-2) unstable; urgency=medium [ Bryan Quigley ] * Remove upstart support [ Colin King ] * Update Standards-Version to 4.1.2 -- Colin King Mon, 11 Dec 2017 18:25:11 +0000 thermald (1.7.0-1) unstable; urgency=medium * sync with latest upstream release 1.7 * remove patches from previous release as they are all merged into 1.7 -- Colin King Fri, 20 Oct 2017 22:44:33 +0100 thermald (1.6.0-5) unstable; urgency=medium * Initialize lowest_valid_index to prevent SEGV - upstream commit 18d6ca75bbc504a -- Colin King Fri, 7 Jul 2017 19:26:58 +0100 thermald (1.6.0-4) unstable; urgency=medium * Fix dbus re-init accessing deleted pointer - upstream fix 9c5d8354dd8efff340 * Update Standards-Version to 4.0.0 -- Colin King Fri, 30 Jun 2017 06:27:41 +0100 thermald (1.6.0-3) unstable; urgency=medium * Pull in a few upstream and Ubuntu fixes: - remove duplicate assignment to critical_temp (minor code cleanup) - thd_parse: check for xmlNodeListGetString NULL returns fixes potential NULL ptr deference bug - fix typo on field name default_prefernce - Don't terminate thermald engine if thd_engine is null (LP: #1677427) fixes segfault if SIGTERM occurs during startup. -- Colin King Fri, 21 Apr 2017 11:16:23 +0100 thermald (1.6.0-2) unstable; urgency=medium * set default preference to ENERGY_CONSERVE - upstream fix 37a25879239466f2d096 -- Colin King Thu, 6 Apr 2017 17:00:12 +0100 thermald (1.6.0-1) unstable; urgency=medium * sync with latest upstream release 1.6 * include 2 minor fixes for 1.6.0 to clean up build warnings - thd_cdev: ensure _target_value is initialized - fix build warning on i386 architecture builds -- Colin King Mon, 13 Mar 2017 16:00:02 +0000 thermald (1.5.4-4) unstable; urgency=medium * fix spamming of logs when writes file (LP: #1656528) - patch from Srinivas Pandruvada at Intel, not yet mainline -- Colin King Thu, 23 Feb 2017 09:26:23 +0000 thermald (1.5.4-3) unstable; urgency=medium * upstream fix 7f83ada8133 ("check for recv failure and ensure " "buffer is null terminated") - fixes potential buffer overrun * upstream fix 53154fd496a ("Remove auto adjusted max temp") - addresses aggressive over-throttling on some H/W (LP: #1600599) -- Colin King Fri, 10 Feb 2017 15:19:11 +0000 thermald (1.5.4-2) unstable; urgency=medium * upstream fix 9da073098f7 ("Fix added to improve modem throttling") - handle crash at boot-up - remove dependency on ofono - remove hard-coding of sleep value - enusre throttling works fine when ofono/RIL logs enabled -- Colin King Tue, 3 Jan 2017 09:11:00 +0000 thermald (1.5.4-1) unstable; urgency=medium * sync with latest upstream release - remove all debian/patches as these are now in the 1.5.4 release - add depends on lsb-base (>= 3.0-6) -- Colin King Mon, 31 Oct 2016 10:22:11 -0600 thermald (1.5.3-3) unstable; urgency=medium * Minor upstream fix and add in model throttling for SoFIA-3GR: - thd_cdev_modem: ensure private variables in class are initialized. throttling and online are not initialized, so set the appropriately in the constructor. - Added support for modem throttling on SoFIA-3GR: Added modem as a cooling device for PA (coretemp4) on 3GR. While temp would be read from sysfs device files, cooling would be initiated through telephony framework, via D-Bus. Telephony framework would notify thermald via D-Bus signals, any change in throttling state. thermald would invoke D-Bus methods in telephony framework ONLY to check if its supported and to change the state. -- Colin King Thu, 21 Jul 2016 08:22:36 +0100 thermald (1.5.3-2) unstable; urgency=medium * Fix spelling mistake in thermal-conf man page (Closes: #826178) - change "confirms" to "conforms" -- Colin King Fri, 3 Jun 2016 08:23:11 +0100 thermald (1.5.3-1) unstable; urgency=medium * Sync source to upstream 1.5.3 head * Remove debian patches that are now merged into 1.5.3 - 0001-Initialize-bios_locked-to-false.patch - 0002-Regression-for-default-config-file.patch * Downgrade logging error (commit 8280fd7ec6cff6db6463c8a1b01d2e427e418226) - When there are no relationship tables present, we print error. This causes confusion. So downgrade error as thermald will continue to use its defaults. -- Colin King Thu, 26 May 2016 11:37:39 +0100 thermald (1.5-3) unstable; urgency=medium * Update Standards-Version to 3.9.8 * Fix incorrect path to thermald config file (LP: #1568123) - upstream commit 4a890d7e173678644882e6b863f3650e30d33052 -- Colin King Fri, 29 Apr 2016 07:07:57 +0000 thermald (1.5-2) unstable; urgency=medium * Initialise bios_locked; may lead to random behaviour (LP: #1547594) - bios_locked should be initialised to false so that RAPL is enabled by default. -- Colin King Fri, 19 Feb 2016 17:08:36 +0000 thermald (1.5-1) unstable; urgency=medium * Sync with upstream 1.5 release - remove debain/patches as these are all in the upstream release now -- Colin King Thu, 18 Feb 2016 00:17:12 +0000 thermald (1.4.3-6) unstable; urgency=medium * Fix frequency scaling issue on specific Intel CPUs (LP: #1480349) - roll earlier patches that allow us to cleanly patch the issue - Error recovery when sysfs attrib read fails - Remove wild card for loading - Move parser init to thd_engine - Add white list of the cpu ids -- Colin King Tue, 26 Jan 2016 10:15:11 +0000 thermald (1.4.3-5) unstable; urgency=medium * cdev: turn some info messages to debug to reduce syslog spamming * cdev: RAPL: turn some info messages to debug to reduce syslog spamming -- Colin King Fri, 21 Aug 2015 11:48:00 -0700 thermald (1.4.3-4) unstable; urgency=medium * Fix null pointer deferences with _ART active trip points (LP: #1480821) * Re-enable lockfile (LP:# 1480892) * Report multiple instances of thermald with thd_log_fatal (LP: #1432220) -- Colin King Mon, 3 Aug 2015 18:47:00 +0100 thermald (1.4.3-3) unstable; urgency=medium * Suppress systemd failed service messages (e.g. on VMs) (LP:#1480182) -- Colin King Fri, 31 Jul 2015 09:45:12 +0100 thermald (1.4.3-2) unstable; urgency=medium [Colin Ian King] * Fix typo in option --ignore-cpuid-check * Fix spelling mistake in man page * Fix spelling mistake in README [Martin Pitt] * Fix postinst -- Colin King Tue, 28 Jul 2015 09:58:00 +0100 thermald (1.4.3-1) unstable; urgency=medium * Correct the version number * cthd_engine::user_delete_zone: remove unused variable zone * Remove unused variables * Use correct format specifiers for size_t type * Remove this_option_optind, it is not used and is redundant * Don't assign a value to c if we don't use it again * Fix type warning found by static analysis * Reduce printing of "skip to reduce current state .." * Removing several deprecated warning with new glib * Fix marshalling array error * Fix regression in exit via dbus message * shell script update * Added interface GetSensorTemperature * New DBUS message to get sensor temperature at a given index. -- Colin King Thu, 16 Jul 2015 09:26:00 +0100 thermald (1.4.2-1) unstable; urgency=medium * Sync up with version 1.4.2 * Remove 0003-Fix-Coverity-reported-issues.patch, no longer required -- Colin King Thu, 9 Jul 2015 14:59:12 +0100 thermald (1.4-1) unstable; urgency=medium * Sync up with version 1.4 -- Colin King Mon, 11 May 2015 09:53:11 +0100 thermald (1.3-9) unstable; urgency=medium * Fix buffer overrun on a readlink -- Colin King Fri, 13 Feb 2015 13:13:13 +0000 thermald (1.3-8) unstable; urgency=medium * Handle exit on H/W that does not support thermald (LP:#1325142) -- Colin King Fri, 5 Dec 2014 11:09:44 +0000 thermald (1.3-7) unstable; urgency=medium * Remove redundant re-checking of return from read_msr() * Improve accuracy of unit_value calculation * Null terminate buffer on error return path * Fix resource leak on file descriptor, close fd on error return paths -- Colin King Wed, 3 Dec 2014 09:25:11 +0000 thermald (1.3-6) unstable; urgency=medium * data: thermald.conf: start only at runlevels 2,3,4,5 (LP: #1294895) -- Colin King Thu, 25 Sep 2014 11:37:00 +0100 thermald (1.3-5) unstable; urgency=medium * Fix RT Linux lockup with x86 package temp driver (Closes: #761290) -- Colin King Mon, 15 Sep 2014 09:27:00 +0100 thermald (1.3-4) unstable; urgency=medium * Fix assumption about hwmon0 (LP: #1366541) * Use correct nfds to not rely on memset 0 to pollfds -- Colin King Tue, 9 Sep 2014 16:32:00 +0100 thermald (1.3-3) unstable; urgency=medium * Use correct i386 and amd64 architecture names -- Colin King Wed, 6 Aug 2014 19:05:00 +0100 thermald (1.3-2) unstable; urgency=medium * Fix man page formatting -- Colin King Wed, 6 Aug 2014 14:11:00 +0100 thermald (1.3-1) unstable; urgency=medium * Sync up with version 1.3 -- Colin King Mon, 28 Jul 2014 09:39:34 +0100 thermald (1.2-1) unstable; urgency=medium * Adjust for coretemp path change * Deny non root users to send system bus dbus messages * Remove compile warning * Remove rpmlint warning for manual page * Remove old patches that are now included into version 1.2 * Sync up with version 1.2 -- Colin King Mon, 19 May 2014 12:41:22 +0100 thermald (1.1~rc2-12) unstable; urgency=medium * Deny non root users to send system bus dbus messages (LP: #1314527) -- Colin King Wed, 30 Apr 2014 09:30:21 +0100 thermald (1.1~rc2-11) unstable; urgency=medium [Srinivas Pandruvada] * Fix Kclockwork issue: gettext bounds * Fix klockworks issue with strcasecmp NULL param * Fix klockworks double free complaints * Don't skip the current cdev * Fix klocworks issue with memleak -- Colin King Tue, 18 Mar 2014 10:55:11 +0000 thermald (1.1~rc2-10) unstable; urgency=medium [Colin Ian King] * coverity scan: fix memory leak on trip_ptr * coverity scan: fix leaking dir on error exit path [Srinivas Pandruvada] * coverity scan: fix Unrecoverable parse warning * coverity scan: Untrusted loop bound * coverity scan: Uninitialized scalar field errors -- Colin King Wed, 12 Mar 2014 10:03:33 +0000 thermald (1.1~rc2-9) unstable; urgency=medium * Fix up some memory leaks in !THD_SUCCESS branches * cthd_engine: guard against negative array indexes * csys_fs: fix fd leaks in lseek error return path * cthd_engine: remove redundant reads of thermal zone * thd_engine.cpp: use %u intead of %d for signed integers * thd_model.cpp: use correct integer format specifiers * thd_model.cpp: remove ununsed variable 'file' * thd_parse.cpp: use correct unsigned integer format specifiers * thd_engine.cpp: check fcntl non-blocking error return * fix leak of trip_ptr in read_trip_points * ensure device_path is null terminated * get_preference_cstr: return C string allocated on heap -- Colin King Tue, 11 Mar 2014 09:23:00 +0000 thermald (1.1~rc2-8) unstable; urgency=medium [Simon McVittie ] * Add a patch to install thermald to ${sbindir} without needing a workaround in debian/rules, and have the systemd service file use that path automatically * Install the systemd service file (Closes: #738719) * Activate hardening via DEB_BUILD_MAINT_OPTIONS instead of hardening-wrapper * Add patches to improve the systemd service * Use dh-systemd to sync up enabledness status between sysvinit and systemd [Colin King] * Use __cpuid rather than use inline asm, simplifies i386 PIC builds -- Colin King Wed, 12 Feb 2014 11:49:37 +0000 thermald (1.1~rc2-7) unstable; urgency=low * Redirect fd 0, 1, 2 to /dev/null to stop poll() spinning (Closes: #737093) * Add upstream commit; Prevent exception for invalid sysfs file reads -- Colin King Tue, 11 Feb 2014 08:06:33 +0000 thermald (1.1~rc2-6) unstable; urgency=low * Add upstream commit: Remove warning for non Intel processor * Add upstream commit: Fix checking for cooling_device * Add upstream commit: Fix compenstion using "Processor" thermal cooling device * Re-work PIC ebx workaround -- Colin King Tue, 4 Feb 2014 10:00:01 +0000 thermald (1.1~rc2-5) unstable; urgency=low * Fix up exit() to use standard EXIT_* macros * Fix log messages that don't have a trailing newline at end * Minor re-ordering of PIC ebx pop * Upstart conf: handle exit failures to avoid re-running forever -- Colin King Thu, 30 Jan 2014 11:21:00 +0000 thermald (1.1~rc2-4) unstable; urgency=low * Fix FTBFS, remove quilt from dh line -- Colin King Fri, 10 Jan 2014 17:25:29 +0000 thermald (1.1~rc2-3) unstable; urgency=low * Correctly rename man pages, fixes FTBFS (Closes: #734786) * Apply buggy thermal zone trip index fix (Closes: #734832) -- Colin King Fri, 10 Jan 2014 11:34:53 +0000 thermald (1.1~rc2-2) unstable; urgency=low * Fix i386 PIC ebx clobbering with cpuid -- Colin King Thu, 9 Jan 2014 18:52:01 +0000 thermald (1.1~rc2-1) unstable; urgency=low * Initial Debian Release (Closes: #734615) -- Colin King Mon, 6 Jan 2014 12:05:23 +0000