Accepted tinc 1.0.28-1~bpo8+1 (source amd64) into jessie-backports, jessie-backports

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Format: 1.8
Date: Mon, 18 Jul 2016 20:55:54 +0800
Source: tinc
Binary: tinc
Architecture: source amd64
Version: 1.0.28-1~bpo8+1
Distribution: jessie-backports
Urgency: high
Maintainer: Guus Sliepen <guus@debian.org>
Changed-By: Aron Xu <aron@debian.org>
Description:
 tinc       - Virtual Private Network daemon
Closes: 71274 80451 84197 84873 98165 98730 102798 106843 111099 116034 119157 119653 141705 144718 151967 153156 173987 175632 175633 184400 188874 189432 201803 204639 208591 217646 219360 223276 230180 259489 281366 292450 292920 293371 294819 296148 296281 312982 318562 319591 322305 332963 333303 391610 412351 424209 434191 440150 482566 548759 552927 572116 629880 631761 679130 690685 704702 710267 731279 748107 774682
Changes:
 tinc (1.0.28-1~bpo8+1) jessie-backports; urgency=medium
 .
   * Rebuild for jessie-backports.
 .
 tinc (1.0.28-1) unstable; urgency=medium
 .
   * New upstream release.
     - Fixes FTBFS on kfreebsd.
   * Systemd service files are now provided by upstream.
 .
 tinc (1.0.27-2) unstable; urgency=medium
 .
   * Fix tinc@.service.
 .
 tinc (1.0.27-1) unstable; urgency=medium
 .
   * New upstream release.
   * Bump Standards-Version.
   * Add native systemd unit files.
   * Automatically convert networks listed in nets.boot to systemd service
     instances on upgrade.
 .
 tinc (1.0.26-1) unstable; urgency=medium
 .
   * New upstream release.
   * Use the contents, not the presence, of the pidfile to check that tincd is
     shut down properly. Closes: #774682
   * Bump Standards-Version.
 .
 tinc (1.0.24-2) unstable; urgency=medium
 .
   * Improve the init script: stopping tinc now waits for the process to
     terminate. If that doesn't happen in 5 seconds, it will send the TERM
     signal again (which helps if tinc is waiting for a script to finish
     executing). It now also detects whether the process mentioned in the PID
     file is actually running, and if not it will exit early and without
     warnings. Closes: #748107
 .
 tinc (1.0.24-1) unstable; urgency=medium
 .
   [ Guus Sliepen ]
   * New upstream release
   * Add a debian/watch file.
   * Bump Standards-Version.
 .
   [ Gian Piero Carrubba ]
   * Allow resource limits to be set in /etc/default/tinc.
     Closes: #690685, #704702
 .
 tinc (1.0.23-2) unstable; urgency=low
 .
   * Use if-statements instead of && in shell scripts. Closes: #731279
     The && operator does not clear the error status, and if the next statement
     in a shell script does not change the error status it would cause the
     script to prematurely exit. Thanks to Peter Reinholdtsen for spotting it.
   * Use absolute path to tincd in the if-post-down script.
 .
 tinc (1.0.23-1) unstable; urgency=low
 .
   * New upstream release.
 .
 tinc (1.0.22-1) unstable; urgency=low
 .
   * New upstream release.
     - Handles whitespace between command line flags and optional arguments.
       Closes: #710267
   * Bump Standards-Version.
   * Source /lib/lsb/init-functions in the init.d script.
   * Don't use texi2html anymore, use automake's install-html target which uses
     makeinfo.
 .
 tinc (1.0.21-1) unstable; urgency=low
 .
   * New upstream release.
     - Includes fix for CVE-2013-1428.
 .
 tinc (1.0.19-3) unstable; urgency=high
 .
   * Drop packets forwarded via TCP if they are too big (CVE-2013-1428).
 .
 tinc (1.0.19-2) unstable; urgency=low
 .
   * Fix behaviour of tinc-pidfile. Closes: #679130
   * Enable parallel building in debian/rules.
 .
 tinc (1.0.19-1) unstable; urgency=low
 .
   * New upstream release.
   * Bump debian/compat so tinc gets built with hardening flags.
   * Allow tinc-pidfile in /etc/network/interfaces.
 .
 tinc (1.0.18-1) unstable; urgency=low
 .
   * New upstream release.
 .
 tinc (1.0.17-1) unstable; urgency=low
 .
   * New upstream release.
   * Enable support for UML and VDE.
 .
 tinc (1.0.16-1) unstable; urgency=low
 .
   * New upstream release.
   * Mention alarm option in /etc/init.d/tinc's usage information.
     Closes: #631761
 .
 tinc (1.0.15-1) unstable; urgency=low
 .
   * New upstream release.
   * Send SIGALRM to running tinc daemons whenever an interface is brought up
     with the ifupdown framework. Based on a patch from Joachim Breitner.
     Closes: #629880
   * Allow tinc daemons to be started using ifupdown.
 .
 tinc (1.0.14-1) unstable; urgency=low
 .
   * New upstream release.
   * Bump Standards-Version.
 .
 tinc (1.0.13-1) unstable; urgency=low
 .
   * New upstream release.
 .
 tinc (1.0.12-2) unstable; urgency=low
 .
   * Remove debconf questions. Closes: #572116
     Apparently debconf may not be used to ask a question at install time and
     use the answer at upgrade time. Instead of kludging around this
     restriction, no questions are asked anymore, and tinc will now always be
     restarted when upgrading.
   * Wait up to 5 seconds for tinc daemon to stop before restarting it.
 .
 tinc (1.0.12-1) unstable; urgency=low
 .
   * New upstream release.
   * Bump Standards-Version.
   * Migrate from CDBS to debhelper.
   * Convert source package to 3.0 (quilt) format.
   * Remove useless tinc.modules.
   * Use init.d script from Michael Tokarev, allowing per-network arguments to
     tincd.
   * Remove update-rc.d calls from postinst and postrm.
   * Let the init.d script depend on $remote_fs.
 .
 tinc (1.0.11-1) unstable; urgency=low
 .
   * New upstream release.
   * Cope with texi2html arbitrarily changing its output directory.
     Closes: #552927
   * Do not stop tinc when configuring a new version, just restart after
     the upgrade.
 .
 tinc (1.0.10-1) unstable; urgency=low
 .
   * New upstream release.
   * Include Russian debconf translation. Closes: #548759
 .
 tinc (1.0.9-1) unstable; urgency=low
 .
   * New upstream release.
     - Binds IPv6 sockets only to IPv6. Closes: #440150
   * Update copyright file. Closes: #482566
 .
 tinc (1.0.8-2) unstable; urgency=low
 .
   * Include Portugese debconf translation. Closes: #434191
 .
 tinc (1.0.8-1) unstable; urgency=low
 .
   * New upstream release. Closes: #173987
   * Include german debconf translation. Closes: #412351
   * Build-Depend on texinfo. Closes: #424209
 .
 tinc (1.0.7-1) unstable; urgency=low
 .
   * New upstream release.
 .
 tinc (1.0.6-1) unstable; urgency=low
 .
   * New upstream release.
 .
 tinc (1.0.5-1) unstable; urgency=low
 .
   * New upstream release. Closes: #391610
   * Add an LSB section to the init script.
 .
 tinc (1.0.4-4) unstable; urgency=low
 .
   * Include swedish debconf translation. Closes: #332963
   * Remove nets.boot on purge. Closes: #333303
 .
 tinc (1.0.4-3) unstable; urgency=low
 .
   * Depend on debconf | debconf-2.0.
   * Include vietnamese debconf translation. Closes: #322305
   * Include japanese debconf translation. Closes: #319591
 .
 tinc (1.0.4-2) unstable; urgency=low
 .
   * Compensate for change in texinfo's output directory. Closes: #318562
   * Include Czech translation of the debconf questions. Closes: #312982
 .
 tinc (1.0.4-1) unstable; urgency=low
 .
   * New upstream release. Closes: #294819
   * Update french translation of debconf template. Closes: #293371, #296148
   * Allow dashes in nets.boot. Closes: #296281
 .
 tinc (1.0.3-4) unstable; urgency=low
 .
   * Call debconf early in postinst so it won't get confused by output
     from other commands in the postinst script. Closes: #292920
   * If MAKEDEV doesn't know about net/tun, fall back to tun.
 .
 tinc (1.0.3-3) unstable; urgency=low
 .
   * Fix clean rule in debian/rules.
 .
 tinc (1.0.3-2) unstable; urgency=low
 .
   * Don't check for /dev/tap* in postinst if we don't create them anyway.
   * MAKEDEV expects net/tun instead of tun.
   * Don't ask if /dev/net/tun should be created, just do it.
     Closes: #259489, #292450
   * Move $EXTRA from init.d/tinc to /etc/default/tinc. Closes: #281366
 .
 tinc (1.0.3-1) unstable; urgency=low
 .
   * New upstream release.
   * Adopting the package from Ivo.
   * Use invoke-rc.d, and tell user to do so as well. Closes: #223276
   * Let force-reload do the same thing as reload. Closes: #230180
 .
 tinc (1.0.2-2) unstable; urgency=low
 .
   * debian/control: Oops, really make that automake1.7.
 .
 tinc (1.0.2-1) unstable; urgency=low
 .
   * New upstream release:
       * Fix broken replies to CHAL_RESP.  (Closes: #217646)
   * debian/control: Updated automake build dependency to automake1.7.
     (Closes: #219360)
 .
 tinc (1.0.1-2) unstable; urgency=low
 .
   * debian/dirs: Removed, moved contents to tinc.dirs.
     (Closes: #208591)
   * debian/docs: Renamed to tinc.docs.
   * debian/rules: Install the contents of doc/sample-config.tar.gz in
     /usr/share/doc/tinc/examples instead of /etc/tinc.
   * debian/Makefile*: Removed.
 .
 tinc (1.0.1-1) unstable; urgency=low
 .
   * New upstream release.
   * debian/patches/001_openbsd_device.c.patch: Removed.
 .
 tinc (1.0release-1) unstable; urgency=low
 .
   * New upstream version.  (Closes: #204639)
       * Fixes switching back to normal logging mode when killing with
         SIGINT twice.  (Closes: #175633)
       * Uses one SSL context struct for each connection, speeding up
         encrypting/decrypting data; don't throw away out of sequence
         packets.  (Closes: #188874)
       * Fixes handling of broadcast messages.  (Closes: #175632)
   * debian/rules: Use cdbs.
   * debian/control: Build-Depend on cdbs, liblzo-dev.
   * debian/patches/001_openbsd_device.c.patch: Sync openbsd/device.c to
     latest CVS version.
 .
 tinc (1.0pre8-6) unstable; urgency=low
 .
   * debian/po/fr.po: Added French debconf translation.  (Closes: #201803)
 .
 tinc (1.0pre8-5) unstable; urgency=low
 .
   * debian/*: Change to po-debconf, thanks to From: Michel Grentzinger
     <mic.grentz@online.fr> for the patch:
       - change debhelper dependency to 4.1.16 (according to man
         po-debconf),
       - manually add nl translation in old tinc.templates (master),
       - run debconf-gettextize debian/tinc.templates,
       - move old templates files (debian/tinc.templates.*),
       - change construction "If you say no" to "If you refuse",
   * debian/rules: Call po2debconf.
   * debian/rules: Don't copy COPYING.README to the package.
   * debian/control: Update Standards-Version.
   * debian/conffiles: Removed.
   * debian/postinst: No longer use mknod directly, use MAKEDEV.
 .
 tinc (1.0pre8-4) unstable; urgency=low
 .
   * src/net.h, src/net_packet.c, src/net_setup.c: Apply fix from CVS
     for OpenSSL-related memory leaks.  (Closes: #189432)
 .
 tinc (1.0pre8-3) unstable; urgency=low
 .
   * m4/openssl.m4: Updated to CVS version.  (Closes: #184400)
 .
 tinc (1.0pre8-2) unstable; urgency=low
 .
   * debian/postinst: Create /dev/net/tun if it doesn't exist.
   * debian/tinc.modules: Add alias for /dev/net/tun.
   * debian/rules: Install tinc.modules.
   * These things together: (Closes: #151967, #153156)
 .
 tinc (1.0pre8-1) unstable; urgency=low
 .
   * New upstream version.
   * debian/rules:
       - DEB_BUILD_OPTIONS support.
       - Enable --enable-tracing by default.
 .
 tinc (1.0pre7-3) unstable; urgency=low
 .
   * Properly install _all_ info pages. (Closes: #144718)
 .
 tinc (1.0pre7-2) unstable; urgency=low
 .
   * Dutch translation wasn't being installed.
 .
 tinc (1.0pre7-1) unstable; urgency=medium
 .
   * New upstream release.
 .
 tinc (1.0pre6-3) unstable; urgency=medium
 .
   * Synched with upstream CVS.
   * Added build dependency on zlib1g-dev. (Closes: #141705)
 .
 tinc (1.0pre6-2) unstable; urgency=low
 .
   * The Section was non-US again, so changed it back to main/net.
 .
 tinc (1.0pre6-1) unstable; urgency=low
 .
   * New upstream release.
   * Fixed text in debian/copyright
 .
 tinc (1.0pre5-4) unstable; urgency=low
 .
   * Added a debconf question for restarting on upgrade.
   * Added reload option to init.d, start with EXTRA='-d' default.
   * Moved from non-US to main.
   * Install example configuration files.
   * The HTML documentation wasn't installed; fixed.
 .
 tinc (1.0pre5-3) unstable; urgency=low
 .
   * Config variables are now treated case sentitivly again.
   * Added a forgotten xstrdup.
 .
 tinc (1.0pre5-2) unstable; urgency=low
 .
   * MaxTimeout accidentally wasn't configurable. (Closes: #119653)
 .
 tinc (1.0pre5-1) unstable; urgency=low
 .
   * New upstream version. (Closes: #119653)
   * Init script redone in sh.
 .
 tinc (1.0pre4-1.cvs010621.6) unstable; urgency=low
 .
   * Somehow po-Makefile.in.in.diff got lost, readded. (Closes: #119157)
 .
 tinc (1.0pre4-1.cvs010621.5) unstable; urgency=low
 .
   * Fix a typo in postinst that let it MAKEDEV even on devfs.
     (Closes: #116034)
 .
 tinc (1.0pre4-1.cvs010621.4) unstable; urgency=low
 .
   * Ask before creating the device files. (Closes: #111099)
   * Add a section to the info file.
 .
 tinc (1.0pre4-1.cvs010621.3) unstable; urgency=low
 .
   * Build and install html documentation. (Closes: #106843)
   * Remove build-time dependency on libc6-dev.
 .
 tinc (1.0pre4-1.cvs010621.2) unstable; urgency=low
 .
   * Changed location of the pidfile. (Closes: #102798)
 .
 tinc (1.0pre4-1.cvs010621.1) unstable; urgency=low
 .
   * New upstream version. (Closes: #98730)
   * Rebuilding automatically inserted new config.{sub|guess}.
     (Closes: #98165)
   * Updated Standards-Version.
   * Don't include a sample configuration file.
 .
 tinc (1.0pre3-5) unstable; urgency=low
 .
   * Fixed an error in the init script that prevented tinc from
     starting correctly.
 .
 tinc (1.0pre3-4) unstable; urgency=low
 .
   * Change build-depends for OpenSSL to libssl096-dev
     (Closes: #84197, #84873).
 .
 tinc (1.0pre3-3) unstable; urgency=low
 .
   * Set architecture to any (really this time!) (Closes: #80451).
   * Section set to non-US
 .
 tinc (1.0pre3-2) unstable; urgency=low
 .
   * Set architecture to any (Closes: #80451).
   * Added tinc.modules with some useful module aliases.
 .
 tinc (1.0pre3-1) unstable; urgency=low
 .
   * New upstream version (1.0pre3) (Closes: #71274).
   * Better Depends and Build-Depends lines.
   * Dropped dependencies on libgmp, added libssl.
   * doc-base.tinc: New file.
   * Deleted the file shlibs, as there on longer is a libblowfish.
   * Patch po/Makefile.in.in from po-Makefile.in.in.diff if necessary.
   * Use dh_perl to get accurate perl dependencies.
 .
 tinc (1.0pre2-1.1) unstable; urgency=low
 .
   * NMU at Ivo's request as his application is being processed, and his
     sponsor is based in the US.
 .
 tinc (1.0pre2-1) unstable; urgency=low
 .
   * postinst creates a file /etc/tinc/nets.boot, containing all networks
     to be started upon system startup;
   * init.d script starts all networks from that list.
   * postinst script creates tap devices.
 .
 tinc (1.0pre1-0.4) unstable; urgency=low
 .
   * postinst script.
 .
 tinc (1.0pre1-0.3) unstable; urgency=low
 .
   * system startup script.
 .
 tinc (1.0pre1-0.2) unstable; urgency=low
 .
   * Included the blowfish license.
 .
 tinc (1.0pre1-0.1) unstable; urgency=low
 .
   * Initial Release.
Checksums-Sha1:
 622d3e53be48724533f76da7817c446eb54f8fa8 1417 tinc_1.0.28-1~bpo8+1.dsc
 a5e3fba9fef87de12d91a1f9f88b21f3dd2dc960 488837 tinc_1.0.28.orig.tar.gz
 4f39ed852ba6e30f8e24a6eee1f9fef69621805d 13640 tinc_1.0.28-1~bpo8+1.debian.tar.xz
 1358882894d7688e5a0949df780ad9283dac227a 203734 tinc_1.0.28-1~bpo8+1_amd64.deb
Checksums-Sha256:
 c1b08d64ab2748b911c86fc6eaf2ba690daa56dbe347a94273035b81a2161e86 1417 tinc_1.0.28-1~bpo8+1.dsc
 0b502699360f09ce2128a39cf02abca07bfc699fc02ce829b3a90cf5e1e8b344 488837 tinc_1.0.28.orig.tar.gz
 110f96c3ac62c3479acd7fc8138de8f34445a24d06144bb39a96c58058f5261e 13640 tinc_1.0.28-1~bpo8+1.debian.tar.xz
 a7461d9cc9ea3532e3fc1deb9283e3afdc2c8578c8de119df24dc627f3d6f1c0 203734 tinc_1.0.28-1~bpo8+1_amd64.deb
Files:
 4cf0372ac793e00e780fd66772fda407 1417 net optional tinc_1.0.28-1~bpo8+1.dsc
 9ca14c9902fb4011b5df6a09ffd40ea9 488837 net optional tinc_1.0.28.orig.tar.gz
 82f4be6f1927dc29b7c0d60d479f2776 13640 net optional tinc_1.0.28-1~bpo8+1.debian.tar.xz
 4fa8651992444f4451da203656958330 203734 net optional tinc_1.0.28-1~bpo8+1_amd64.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBCAAGBQJXjNLSAAoJEPbsVcVkKA0e6y4H/RY3ZlwqCqTa0c1QsQrbiq5N
qcdLH+FxeG4mJuYRyq24uJNNcxzABIFoMxwd6/c3Q5e3SGX0LX9tKs7DFyPxmFvZ
ADVCZjBQlVQPK8GvrTZtIK8OHctPaZV9jllE2mqwHQuEXW2+Nt+sfAdnl67gGNLB
w2mZcleOVUgyyyMulBa1zi16rDzLmPCenzS3ByV2VNS2zo0ZDXsVOWSqGgIa4/+i
zTqBDcvdNK6Vp70U6b5tU6aEdpR92blPaZgoqUKCS4OSKADj7YSfYwZuxS1Mtz6d
31T2ghinV7WrgozvtFJlFtaFFUiEofwSNQmoTLozhDdiILkox747f8pd0zVjQiM=
=q3L6
-----END PGP SIGNATURE-----